 |
Questions ? Call us at 905-624-5536 |
|||||
| H.H. Roberts Machinery Limited 1324 Matheson Blvd E., Mississauga, Ontario, Canada. L4W-2Z7, Fax 905-624-9065
|
||||||
 |
| IN STOCK 26" x 80" with vertical turret shown with horizontal turret |
| Available with: | ||
 |
 |
|
| ■ Turcite-B coated on mating surfaces of saddle and guideways | ||
| ■
Precision ballscrew, high rigidity precision compound bearings ensure
accurate positioning and efficient driving. Centralized oil lubricator providing forced automatic lubrication to ballscrews, sliding surfaces. |
||
| ■
High spindle speed with wide variable speed ranges.Low noise
80db, CKE-Z series machine adopting the smart automatic gear changing mechanism enables automatic speed changes among low, medium, high speed ranges without turning off the machine.CKE-i series with independent spindle strcture and frequency converted motor or servo motor enables high spindle speed and stepless spindle changing. |
||
| ■ Flexible control panel enables convenient tool setting. | ||
| ■ Popular full enclosed guards with interlock offer a waterproof and chip-free environment. | ||
| ■ Vertical 4-position toolpost, horizontal 6-position toolpost, quick change toolpost, etc are available for your selection | ||
| ■ Dual electronic handwheels on apron | ||
| ■ Operator console slides on independent guides to allow positioning in the best position for the job at hand. | ||
| ■ Lever on apron for forward / stop / reverse for instictive use in MDI mode | ||
| ■ Joystick on apron for rapid traverse of X and Z. | ||
| ■ Optional pneumaticor hydraulic chuck and tailstock are available. | ||
| ■ Anilam, Fanuc, Siemens, Fagor,etc control systems can be appointed. | ||
| CKE6156Z | CKE6166Z | |
| Swing over bed | 560mm 22" |
660mm 26" |
| Width of bed | 400mm 15.75" |
|
| Maximum length of workpiece | 750 / 1000 / 1500 / 2000mm 29.52 / 39.37 / 59.05 / 78.74" |
|
| Maximum swing over slide | 330mm 13" |
430mm 16.92" |
| X travel | 305mm 12" |
|
| Z travel | 680 / 930 / 1430 / 1930mm 26.77 / 36.61 / 56.3 / 76" |
|
| Spindle nose | D1-8" | |
| Chuck size | 250mm 9.84" |
315mm 12.4 |
| Taper of spindle bore | 1:20 | |
| Spindle bore | 82mm | |
| Steps of spindle speed | 3-step power shift, automatic, program controlled | |
| Spindle speeds in each range | 7 - 135 30 - 550 110 - 2200 |
|
| Spindle motor | 7.5Kw 10 Hp |
|
| Rapid traverse X / Z | 6 / 10 M/min 236 / 393 IPM |
4 / 8 M/Min 157 / 314 IPM |
| Repeatability of toolpost | 0.008 mm 0.0003" |
|
| Vertical 4-position Toolpost changing time | 2.4 sec | |
| Horizontal 6-position Toolpost changing time | 3.0 sec | |
| Diameter of tailstock quill | 75mm 2.95" |
|
| Travel of tailstock quill | 150mm 5.9" |
|
| Taper of tailstock quill | Morse 5 | |
| Net weight | 2,600 / 2,650 / 2,750 / 2,850 Kg 5,720 / 5,830 / 6,050 / 6,270 Lbs |
2,700 / 2,750 / 2,850 / 2,950 Kg 5,940 / 6,050 / 6,270 / 6,490 Lbs |
| Overall Length | 2580 / 2830 / 3330 / 3830 mm 102 /112 / 131 / 151" |
|
| Overall depth and height | 1750 x 1620mm 69 x 64" |
1750 x 1700mm 69 x 67" |
