Millstar V-520 manual and CNC bed mills

Millstar VH-480 Vertical Manual or CNC Bed Mill
43" x 20 " x 20" Travels

Jiuh-YEH Millstar V520 vertical bed mill

The bed, column, saddle and table are manufactured from high quality Meehanite cast iron, stress relieved for high stability.
All slideways are hardened, precision ground, then coated with Turcite-B for maximum wear resistance.
The X, Y axes are protected by stainless steel telescopic covers.
The X, Y axis drive employs high precision lead screws, combined with double nuts, ensuring high accuracy of feed.
The spindle runs on precise angular contact bearings.
The spindle is precision manufactured from SCM21 alloy steel, heat treated and precision ground.
All gears in milling head are hardened and precision ground for quiet running.
The X-axis feed is driven by a high torque servo motor, providing variable feed speed.
The powerful spindle motor gives a high chip removal rate.
Choice of Fanuc, Anilam or Mitsubishi CNC controller.

Spindle Lubrication and cooling The gears and bearings in the milling head are lubricated by an efficient lubrication system to ensure their normal service life. The oil, after fan cooling, is delivered to the gears and bearings.	Practical Telescopic Covers The X,Y axes slideways are protected by telescopic cover to prevent scratching on surfaces from chips, and extend the service life of the machine.
Rugged Saddle Massive, scientifically rib reinforced saddle provides rigid support for the table and heavy workpieces.	Central Auto Lube System

V-520
Table	Table size	59" x 17.7 "	1500 x 450 mm
	X axis travel	43.3"	1100 mm
	Y axis travel	20.5"	520 mm
	Z axis travel	19.7"	500 mm
	T-Slots ( width x trough number x pitch)	18 mm x 3 x 80 mm
	Rapid traverse X, Y and Z	1 ~ 60 IPM	25 ~ 1500 mm/min
Cutting Range	Cutting length	43.3"	1100 mm
	Cutting width	19.3"	490 mm
	Cutting height	19.68	500 mm
	Loading weight	2200 lbs	1000 Kgs
Vertical Spindle	Spindle speeds variable	45 to1500 rpm
	Spindle taper	NT50 Cat-V-50 or BT-50
	Distance of spindle nose to table surface	4" ~ 23.6 "	100 - 600 mm
	Distance of spindle center to column	20.5"	520 mm
Power	Spindle motor	10 Hp
Power	Axis motors	1 Hp
Dimensions	L/R x F/B x Height	104 x 79 x 100 "	2630 x 2000 x 2550 mm
	Net weight (before packing)	8630 lbs	3800 KG
	Gross weight (after packing)	10,120 lbs	4600KG

Stanadrd Equipment

Options