Search our site:
 
HH Roberts Machinery Ltd
Questions ?
Call us at 905-624-5536

 


Annn Yang 1200mm through 1500mm Models

Swings of 47", 51", 55" and 59".

Up to 10,000mm / 393" centers.
Annn Yang DY-1200 x 5000 CNC lathe
Annn Yang DY-1200 x 5000 CNC lathe viewed from the tailstock end
Shown with a toolholder on a separate slide for a large deep hole drill.

Model DY-1200C DY-1300C DY-1400C DY-1500C
  Swing over bed 1200mm
47.24"		 1300mm
51.18"		 1400mm
55.11"		 1500mm
59.05"
  Swing over cross slide 830mm
32.67"		 930mm
36.61"		 1030mm
40.55"		 1130mm
44.48"
Machining capacity Distance between centers 1500 / 2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 / 9000 / 10000
59" / 78" / 118" / 157" / 196" / 275" / 314" / 354" / 393"
Main spindle  
Spindle
Nose
Spindle
Bore
Spindle
speed
A2-11
160mm
6.3"
L 20 - 110
M 110 - 320
H 320 - 660
A2-15
230mm
9.05"
L 20 - 100
M 100 - 200
H 200 - 400
A2-20
320mm
12.6"
L 2 - 20
M 20 - 70
H 70 - 300
A2-20
360mm
14.17"
L 2 - 20
M 20 - 70
H 70 - 250
A2-28
410mm
16.14"
L 2 - 20
M 20 - 70
H 70 - 250
Travel Cross travel (X axis) 750mm
29.52"
Feeds X axis rapid traverse 5M/min
196 IPM
Z axis rapid traverse 7.5M/min
295 IPM
Cutting feed rate 0.001-500mm/rev
0.0004” - 20”/rev
Motors Main motor 50hp
Inverter 50hp
X axis servo motor Fagor AC servo motor FXM 55 /3.62kw/17.3Nm / 2000rpm
Z axis servo motor Fagor AC servo motor FXM 78 /10.7kw/ 51.1Nm / 2000rpm
Oil pump 100W
Coolant pump 450W, 6~10bar
Hydraulic tank pump (optional) 3hp (2.2kw)
Tank capacity Hydraulic tank (optional) 20L
Lubrication pump 8L
Ball screw X axis diameter 40mm
Z axis diameter 80mm
Bed Width 692mm
27.24"
Tailstock Quill diameter 125mm
4.92"
Quill travel 350mm
13.77"
Quill taper MT6
Measurement Net weight (approx.) 10500, 11000, 12000, 13000, 14000, 15000, 16000, 17000, 18000, 19000 Kg

23100, 24200, 26400, 28600, 30800, 33000, 35200, 37400, 39600, 41800 LBS
     
Above specifications are subject to change without notice. Special requirement please connect with us.

Standard Equipment and Features
• automatic gear change system
• quick change 4 way toolpost
• coolant system
• centralized automatic lube system for slideways and ballscews
• steady rest
• worklight(s)
 
Options Include
• Hydraulic power chucks
• Choice of Anilam, Fagor or Fanuc CNC controls
• Headstock oil cooling system
• Electric or Hydraulic tool turrets, horizontal or vertical axis
• Hydraulic tailstock
• Air lift on tailstock
• Special carraiges and steadies for deep hole drilling
• Chip conveyor systems and chip carts
• Larger capacity steady rests

An Annn Yang 1200 x 5000 CNC lathe being place on its shipping skid An Annn Yang 1400 CNC lathe shown before the CNC and electronics are fitted Showing the Annn Yang DY-1500 x 2000 CNC lathe A view of the Annn Yang DY-1400 x 3000 lahte from the back side
A different view of the Annn Yang CNC lathe being lowered onto its shipping skid The DY-1200 x 5000 now on its shipping skid A tailstock end view of the DY-1200 x 5000 on its shipping skid An Annn Yag DY-1500 x 2000 CNC lathe with the doors open to reaveal the tool turret.
Showing the work area of an Annn Yang DY-1400 CNC lathe Showing the Annn Yang 1500 x 2000 CNC lathe fitted with the optional chip conveyor This is the Annn Yang DY-1400 x 3000 awaiting shipping An Annn Yang DY-1200 x 2000 being lower onto a steel shipping skid
A view of the tailstock of an Annn Yang DY-1500 Showing the CNC operator panel on an Annn Yang 1400 CNC lathe Annn Yang DY 1400 CNC lahte Sowing a special swiveling mounted operator console with a Fagor CNC control
  An Annn Yang DY-1200 x 4000 CNC lathe Preparing the Annn Yang DY-1400 for shipping  

power turret hydraulic tailstock
12 tool turret Servo motor for spindle positioning
tailstock with air lift system direct drive on Z axis
linear Scales hydraulic chuck
electric 4 way turret