| Search our site: |  |
Questions ? Call us at 905-624-5536 |
||
Annn Yang 1600mm through 1800mm C-Models Swings of 63 ", 67 " and 71 " Up to 12,000mm / 472" centers |
 |
| MODEL | DY-1600C | DY-1700C | DY-1800C | |||||||||||||||||||
| Swing over bed | 1600mm 63" |
1700mm 67" |
1800mm 70.86 |
|||||||||||||||||||
| Swing over cross slide | 1120mm 44" |
1220mm 48" |
1320mm 52" |
|||||||||||||||||||
Machining capability |
Distance between centers | 2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 / 9000 / 10000 / 11000 / 12000mm 79", 118", 157", 197", 236", 275", 315", 354", 393", 433", 472" |
||||||||||||||||||||
Main spindle |
|
|||||||||||||||||||||
| Spindle taper | MT15 | |||||||||||||||||||||
Travel |
Cross travel (X axis) | 900mm 35.4" |
||||||||||||||||||||
Feeds |
X axis rapid traverse | 5M/min 196 IPM |
||||||||||||||||||||
| Z axis rapid traverse | 5M/min 196 IPM |
|||||||||||||||||||||
| Cutting feed rate | 0.001-500mm/rev 0.0004”-20”/rev | |||||||||||||||||||||
Motors |
Main motor | 50hp | ||||||||||||||||||||
| Inverter | 50hp | |||||||||||||||||||||
| X axis servo motor | Fagor AC servo motor FXM 55 /3.62kw/ 17.3Nm / 2000rpm | |||||||||||||||||||||
| Z axis servo motor | Fagor AC servo motor FXM 78 / 10.7kw/ 51.1Nm / 2000rpm | |||||||||||||||||||||
| Oil pump | 100W | |||||||||||||||||||||
| Coolant pump | 450W, 6~10bar | |||||||||||||||||||||
| Hydraulic tank pump (optional) | 3hp 2.2kw |
|||||||||||||||||||||
Tank capacity |
Hydraulic tank (optional) | 20L | ||||||||||||||||||||
| Lubrication pump | 8L | |||||||||||||||||||||
Ball screw |
X axis diameter | 40mm 1.57" |
||||||||||||||||||||
| Z axis diameter | 80mm 3.15" |
|||||||||||||||||||||
Bed |
Width | 888mm 35" |
||||||||||||||||||||
Tailstock |
Quill diameter | 180mm 7" |
||||||||||||||||||||
| Quill travel | 430mm 17" |
|||||||||||||||||||||
| Quill taper | MT6 | |||||||||||||||||||||
Measurement |
Net weight (approx.) | |||||||||||||||||||||
Above specifications are subject to change without notice. Special requirement please connect with us. |
||||||||||||||||||||||
| Standard Equipment and Features • automatic gear change system • quick change 4 way toolpost • coolant system • centralized automatic lube system for slideways and ballscews • steady rest • worklight(s) Options Include • Hydraulic power chucks • Choice of Anilam, Fagor or Fanuc CNC controls • Headstock oil cooling system • Electric or Hydraulic tool turrets, horizontal or vertical axis • Hydraulic tailstock • Air lift on tailstock • Special carraiges and steadies for deep hole drilling • Chip conveyor systems and chip carts • Larger capacity steady rests |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|