| Search our site: |  |
Questions ? Call us at 905-624-5536 |
||
| |
Annn Yang 2200mm through 2600mm C-Models Swings of 86", 94" and 102" Up to 12,000mm / 472" centers |
 |
| MODEL | DY-2200C | DY-2400C | DY-2600C | ||||||||||||||||
| Swing over bed | 2200mm 86.1" |
2400mm 94.5" |
2600mm 102.3" |
||||||||||||||||
| Swing over cross slide | 1700mm 67" |
1900mm 74.8" |
2100mm 82.6" |
||||||||||||||||
Machining capability |
Distance between centers | 2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 / 9000 / 10000 / 11000 / 12000mm 79", 118", 157", 197", 236", 275", 315", 354", 393", 433", 472" |
|||||||||||||||||
Main spindle |
|
||||||||||||||||||
Travel |
Cross travel (X axis) | 1350mm 53.15" |
|||||||||||||||||
Feeds |
Rapid traverse | 5M/min 196 IPM |
|||||||||||||||||
| Cutting feed rate | 0.001-500mm/rev 0.0004”-20”/rev |
||||||||||||||||||
Motors |
Main motor | 80hp (according to customer's requirement) | |||||||||||||||||
| Inverter | 80hp (according to motor's specification) | ||||||||||||||||||
| X axis servo motor | AC servo motor 4.36kw/20.8Nm / 2000rpm | ||||||||||||||||||
| Z axis servo motor | AC servo motor 10.7kw/51.1Nm / 2000rpm | ||||||||||||||||||
| Oil pump | 100W | ||||||||||||||||||
| Coolant pump | 450W, 6~10bar | ||||||||||||||||||
| Hydraulic tank pump (optional) | 3hp (2.2kw) | ||||||||||||||||||
Tank capacity |
Hydraulic tank (optional) | 20L | |||||||||||||||||
| Lubrication pump | 8L | ||||||||||||||||||
Ball screw |
X axis diameter | 40mm 1.57" |
|||||||||||||||||
| Z axis diameter | 80mm 3.15" |
||||||||||||||||||
Bed |
Width | 1270mm 50" |
|||||||||||||||||
Tailstock |
Quill diameter | 250mm 9.84" |
|||||||||||||||||
| Quill travel | 600mm 23.6" |
||||||||||||||||||
| Quill taper | MT7 | ||||||||||||||||||
Measurement |
Net weight (approx.) | 24000/25000/26000/27000/28000/29000/30000/31000/32000/33000/34000kgs 52,800 to 74,800 lbs |
|||||||||||||||||
Above specifications are subject to change without notice. Special requirement please connect with us. |
|||||||||||||||||||
| Standard Equipment and Features • automatic gear change system • quick change 4 way toolpost • coolant system • centralized automatic lube system for slideways and ballscews • steady rest • worklight(s) Options Include • Hydraulic power chucks • Choice of Anilam, Fagor or Fanuc CNC controls • Headstock oil cooling system • Electric or Hydraulic tool turrets, horizontal or vertical axis • Hydraulic tailstock • Air lift on tailstock • Special carraiges and steadies for deep hole drilling • Chip conveyor systems and chip carts • Larger capacity steady rests |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|