| Search our site: |  |
Questions ? Call us at 905-624-5536 |
||
HH Roberts / AnnnYang AY: 26", 32" and 40" series |
| New on our site .... interactive demos of the Anilam turning and milling controls to give you an opportunity to get the feel of why these controls are so popular and so many of our customers keep coming back for more machines with Anilam CNC on them. Click here |
 |
| Click Here to download our catalogue in PDF format. Adobe Acrobat Reader, latest version will be needed to open this file. |
| This is the medium duty series in a 26" x 80" model. This one has an optional 6 1/2" spindle bore. The base on this series is also one piece. |
 |
 |
| This is a 40" x 60" machine in final preparation in our shop. This machine was built with a special low speed range for a customer turning tough aerospace allow rings for turbines. | Here is a close up of the turret disc showing the 8 turning positions as well as 3 bolt on boring tool block and one facing tool block. Note the abundance of coolant ports. |
| DY-660C | DY-760C | ||
| Machining capability |
Distance between centers | 1000 / 2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 / 9000 / 10000mm 40" to 393" |
|
| Swing over bed | 660mm / 26" | 760mm / 30" | |
| Swing over cross slide | 390mm / 11.4" | 490mm / 19.3" | |
| Main spindle |
Spindle nose | Standard D1-11 or A2-11 (Opt. for power chucks ) Standard 130mm / 5.11" Optional 160mm 6.29" |
|
| Spindle bore | |||
| Spindle speeds (rpm) in 3 gear ranges, manual shift |
D1-11, 130mm, L: 40-130, M: 130-400, H: 400-1200 A2-11, 160mm, L: 20-110, M: 110-320, H: 320-660 |
||
| Spindle taper | MT 12 | ||
| Travel | Cross travel (X axis) | 400mm 15 3/4" | |
| Longitudinal travel (Z axis) | 600 to 9600 mm 24" to 378" |
||
| Feeds | X axis rapid traverse | 5 M / min 200 IPM | |
| Z axis rapid traverse | 7.5 M / min 300 IPM | ||
| Cutting feed rate | 0.001-500mm/rev (0.0004”-20”/rev) | ||
| Motors | Main motor | 30hp(Std.) / 40hp(Opt.) | |
| Inverter | 30hp(Std.) / 40hp(Opt.) | ||
| X axis servo motor | 2.49kw / 11.9Nm / 2000rpm | ||
| Z axis servo motor | 8.31kw / 39.7Nm / 2000rpm | ||
| Oil pump | 100W | ||
| Coolant pump | 450W, 6~10bar | ||
| Hydraulic tank pump | 3hp (2.2kw)(optional for power chuck, hydraulic turret or power tailstock ) |
||
| Tank capacity |
Hydraulic tank (optional) | 20L | |
| Lubrication pump | 8 L | ||
| Ball screw | X axis diameter | 40mm | |
| Z axis diameter | 63mm | ||
| Bed | Width | 482mm | |
| Tailstock | Quill diameter | 115mm | |
| Quill travel | 300mm | ||
| Quill taper | MT6 | ||