| Search our site: |  |
Questions ? Call us at 905-624-5536 |
||
Annn Yang 630mm and 730mm C-Models Swings of 25" and 29" Up to 4,000mm / 157 " centers |
 |
 |
| MODEL | DY-630C | DY-730C | ||||||||||
Machining capability |
Distance between centers | 1000 / 1500 / 2000 / 3000 / 4000mm | ||||||||||
| Swing over bed | 630mm | 730mm | ||||||||||
| Swing over cross slide | 410mm | 510mm | ||||||||||
Main spindle |
Speeds and bores |
|
||||||||||
| Spindle taper | MT10 or MT15 | |||||||||||
Travel |
Cross travel (X axis) | 360mm | ||||||||||
| Longitudinal travel (Z axis) | 700 / 1200 / 1700 / 2700 / 3700mm | |||||||||||
Feeds |
X axis rapid traverse | 5M/min | ||||||||||
| Z axis rapid traverse | 10M/min | |||||||||||
| Cutting feed rate | 0.001-500mm/rev (0.0004”-20”/rev) | |||||||||||
Motors |
Main motor | 20hp | ||||||||||
| Inverter | 20hp | |||||||||||
| X axis servo motor | Fagor AC servo motor FXM 53/2.49kw/11.9Nm / 2000rpm | |||||||||||
| Z axis servo motor | Fagor AC servo motor FXM73/4.36kw / 20.8Nm / 2000rpm | |||||||||||
| Oil pump | 80W | |||||||||||
| Coolant pump | 1/4hp | |||||||||||
| Hydraulic tank pump (optional) | 3hp (2.2kw) | |||||||||||
Tank capacity |
Hydraulic tank (optional) | 20L | ||||||||||
| Lubrication pump | 2L | |||||||||||
| Coolant tank | ||||||||||||
Ball screw |
X axis diameter | 32mm | ||||||||||
| Z axis diameter | 50mm | |||||||||||
Bed |
Width | 435mm | ||||||||||
Tailstock |
Quill diamete | 90mm | ||||||||||
| Quill travel | 203mm | |||||||||||
| Quill taper | MT5 | |||||||||||
Above specifications are subject to change without notice. Special requirement please connect with us. |
||||||||||||
| Standard Equipment and Features • automatic gear change system • quick change 4 way toolpost • coolant system • centralized automatic lube system for slideways and ballscews • steady rest • worklight(s) Options Include • Hydraulic power chucks • Choice of Anilam, Fagor or Fanuc CNC controls • Headstock oil cooling system • Electric or Hydraulic tool turrets, horizontal or vertical axis We can fit Duplomatic or Pragati turrets before or after delivery • Hydraulic tailstock • Air lift on tailstock • Special carraiges and steadies for deep hole drilling • Chip conveyor systems and chip carts • Larger capacity steady rests |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|