HH Roberts 15" and 16" swing CNC lathes and turning centers



				Questions ? Call us at 905-624-5536

HH Roberts / Annyang DY-380 and 410
15" and 16" Swing, 2" Spindle Bore
Available with 30", 40", and 60" Centers.

HH Roberts 16" CNC lathe with Anilam 4200 control


Showing the 16" x 30" model in the lift up door configuration, with standard toolpost
Click Here to download our catalogue in PDF format. Adobe Acrobat Reader, latest version will be needed to open this file.

Download the Annnyang CNC lathe Catalog

This shows the machine closed for protection. The advantages of this guard design are that the door lifts straight up and clears the center line, which allows unobstructed loading with an overhead hoist, very important on larger machines. Also, all the coolant drippings are captured back in the machine, not over the headstock or on the floor. We can add an automatic lift system that will open the door with a pushbutton, or an M-function in the program. Click here for a picture with traditional sliding doors.

	The Pragati turret disc showing the 8 turning positions as well as 3 bolt on boring tool block and one facing tool block. Note the abundance of coolant ports.
	The base castings for this series has provision for fitting a chip conveyor, as shown here. A higher exit point and larger capacity chip cart is also available.
	This is a 16" x 30" model with a hydraulic chuck and hydraulic 8 position turret.
	The base on all of this series machines is a solid, one piece casting.
	To the left is the optional automatic 4 way indexing turret toolpost. This toolpost has 2 coolant ports on the base below the turret. The coolant ports are normally fitted with a copper tube to allow adjustment of the aim. They coolant ports are fixed and do not change when the turret indexes. This is a very economical automatic toolpost if you can live with only 4 tools and the coolant function. This toolpost must be mounted on the rear of the cross slide. These turrets do not lift up during unclamp or rotation

	DY-380	DY-410
swing over bed	380mm 15"	410mm 16"
swing over cross slide	170mm 6.7"	210mm 8"
distance between centers	750 / 1000 / 1500mm 30" / 40" / 60"
max. cutting diameter		300mm 12"
max. cutting length	500 / 750 / 1150mm 29.5" / 45"
spindle nose	D1-6"
spindle bore	54mm 2 1/8"
bar capacity	52mm 2"
spindle taper	MT 6
spindle speed	H 600-3000
	M 200-1300
	L 50-450
cross travel ( X axis)	180mm 7"
Iongitudinal travel ( Z axis)	500 / 750 / 1250mm 29.5" / 45"
rapid traverse X	5 M/min 200 ipm
rapid traverse Z	10 M/min 400 ipm
feed rate	0.001-500mm/rev 0.0004 - 20" / rev
spindle power	10 HP continuous / 12 .5 Hp intermittent
axis servo motors	2.1NM - 4.5NM
optional hydraulic pump	2HP / 1.5KW
bed width	305mm 12"
tailstock quill diameter	54mm 2"
tailstock quill travel	150 5"
tailstock quill taper	MT 4
net weight (approx.)	1650, 1950, 2150 Kgs	1800 / 2000 / 2200 Kgs