| Search our site Loading
|
|||||
 |
Questions ? Call us at 905-624-5536 |
||||
Annn Yang 2200mm through 2600mm C-Models Swings of 86", 94" and 102" Up to 12,000mm / 472" centers |
 |
|
MODEL |
DY-2400C | DY-2500C | DY-2600C | DY-2700C | |
|
Machining capability
|
Distance between centers |
2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 / 9000 / 10000 / 11000 / 12000 ~ 40000mm |
|||
| Swing over bed | 2400mm | 2500mm | 2600mm | 2700mm | |
| Swing over cross slide | 1810mm | 1910mm | 2010mm | 2110mm | |
| BED | Width | 1400mm | |||
|
Main spindle
|
Spindle nose |
A2-15, 230mm, L: 10-97, M: 97-200, H: 200-400 A2-20, 310mm, L: 10-97, M: 97-200, H: 200-350 A2-20, 360mm, L: 10-97, M: 97-200, H: 200-300 A2-28, 410mm, L: 10-97, M: 97-200, H: 200-250 |
|||
| Spindle bore | |||||
| Spindle speed (rpm) | |||||
|
Travel
|
Cross travel (X axis) | 1200mm | 1250mm | 1300mm | 1350mm |
| Longitudinal travel (Z axis) | Same as distance between centers | ||||
|
Feeds
|
X axis rapid traverse | 5M/min | |||
| Z axis rapid traverse | 5M/min | ||||
| Cutting feed rate | 0.001-500mm/rev (0.0004"-20"/rev) | ||||
|
Motors
|
Main motor | Siemens spindle motor 1PH7184-NF, 51kw, 325Nm | |||
| Inverter | -------- | ||||
| X axis servo motor | Siemens or Fanuc or Siemens servo motor 1FK7103-5AF71, 20.5Nm, 5.37kw, 3000rpm | ||||
| Z axis servo motor | Siemens or Fanuc or Siemens servo motor 1FT6108-8SC7, 80Nm, 16.8kw, 2000rpm | ||||
| Oil pump | 100W | ||||
| Coolant pump | 450W, 6~10bar | ||||
| Hydraulic tank pump (optional) | 3hp (2.2kw) | ||||
|
Tank capacity
|
Hydraulic tank (optional) | 20L | |||
| Lubrication pump | 8L | ||||
|
Ball screw
|
X axis diameter | 50mm | |||
| Z axis diameter | 80mm | ||||
|
Tailstock
|
Quill diameter | 300mm | |||
| Quill travel | 600mm | ||||
| Quill taper | MT7 | ||||
| N.W (kg) | 24000/26000/28000/30000/32000/34000/36000/38000/40000/42000/44000 ~ | ||||
|
Above specifications are subject to change without notice. Special requirement please connect with us.
|
|||||
| Standard Equipment and Features • automatic gear change system • quick change 4 way toolpost • coolant system • centralized automatic lube system for slideways and ballscews • steady rest • worklight(s) Options Include • Hydraulic power chucks • Choice of Anilam, Fagor or Fanuc CNC controls • Headstock oil cooling system • Electric or Hydraulic tool turrets, horizontal or vertical axis • Hydraulic tailstock • Air lift on tailstock • Special carraiges and steadies for deep hole drilling • Chip conveyor systems and chip carts • Larger capacity steady rests |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|