| Search our site: |  |
Questions ? Call us at 905-624-5536 |
||
HH Roberts / Cyclematic CT-1118 Toolroom CNC Lathe |
 CNC |
| New on our site .... interactive demos of the Anilam turning and milling controls to give you an opportunity to get the feel of why these controls are so popular and so many of our customers keep coming back for more machines with Anilam CNC on them. Click here |
 |
| This is the open version of the CT-1118. The spindle is a traditional Hardinge style with a 5C nose built in. We use a vector type spindle drive giving constant surface speed. Spindle speeds are up to 4,000 as standard and optionally to 6,000 rpm. The Anilam CNC is standard. Fanuc and others can also be supplied. | |
 |
|
This is the same machine as shown above but with the 4 door chip guard system in place. A 3 door version is also available. |
|
 |
 |
| Shown without chip guards and with the Fanuc 0Ti CNC control |
| Maximum swing | 280
mm 11" |
| Maximum turning diameter | 150
mm 6" |
| Maximum turning length | 457
mm 18" |
| Bar stock diameter (5C collet) | Ø27
mm Ø1 1/16" |
| Hole through spindle | Ø31.75mm Ø1-1/4" |
| CNC Controller | FANUC, Anilam, Fagor |
| Spindle
speeds (Variable) |
0~4000 Optionally to 6,000 |
| Spindle nose I.D./O.D. | 5C
10° / 4° Taper |
| Chuck diameter | Ø150
mm Ø6" |
| Maximum X-axis travel | 155
mm 6-1/4" |
| Maximum Z-axis travel | 340
mm 13-1/2" |
| Rapid traverse | 20
M/min |
| Inverter Spindle Motor | 5
HP |
| X,Z-axis motor | X:2 Z:2 |
| Cutting fluid motor | 1/8
HP |
| Tailstock spindle taper | MT
No.2 |
| Tailstock spindle travel | 95
mm 3 3/4" |
| Machine Dimensions (L x W x H) | 2,050 x 1,000 x 1,650 mm 81" x 40" x 65" |
| Machine weight | 1,000 kgs 2,200 lbs |