| Search our site Loading
|
 |
Questions ? Call us at 905-624-5536 |
||
 |
|
 CKE-6130i at the EMO exhibition in Germany 2007 |
 CKE-6140 with Anilam 4200T |
| Available with: | ||
 |
 |
 |
| • Turcite-B coated on mating surfaces of saddle and guideways | ||
| •
Precision ballscrew, high rigidity precision compound bearings ensure
accurate positioning and efficient driving. Centralized oil lubricator providing forced automatic lubrication to ballscrews, sliding surfaces. |
||
| •
High spindle speed with wide variable speed ranges.Low noise
80db, CKE-Z series machine adopting the smart automatic gear changing mechanism enables automatic speed changes among low, medium, high speed ranges without turning off the machine.CKE-i series with independent spindle cartridge and inverter motor or servo motor enables high spindle speed and stepless spindle changing. |
||
| • Flexible control panel enables convenient tool setting. | ||
| • Popular full enclosed guards with interlock offer a waterproof and chip-free environment. | ||
| • Vertical 4-position toolpost, horizontal 6-position toolpost, quick change toolpost, etc are available for your selection | ||
| • Dual electronic handwheels on apron | ||
| • Operator console slides on independent guides to allow positioning in the best position for the job at hand. | ||
| • Lever on apron for forward / stop / reverse for instictive use in MDI mode | ||
| • Joystick on apron for rapid traverse of X and Z. | ||
| • Optional pneumatic or hydraulic chuck and tailstock are available. | ||
| • Anilam, Fanuc, Siemens or Fagor control systems. | ||
| CKE6130i | CKE6136Z | CKE6136i | |
| Maximum swing over bed | 300mm 11.81" |
360mm 14.17" |
360m 14.17" |
| Width of bed | 205mm 8.07" |
300mm 11.81" |
|
| Maximum length of workpiece | 600mm 23.62" |
750 / 1000mm 29.52 / 39.37" |
|
| Maximum swing over slide | 145mm 5.7" |
180mm 7.08" |
|
| X travel | 190mm 7.48" |
205mm 8.07" |
|
| Z travel | 550mm 21.65" |
620 / 870mm 24.4 or 34.25" |
|
| Spindle nose | A2-5 | A2-6 or D1-6 | A2-5 |
| Chuck size | 165 | 200mm 8" |
165mm 6 1/2" |
| Taper of spindle bore | Morse 5 | Morse 6 | Morse 5 |
| Spindle bore | 40mm 1.57" |
52mm 2.04" |
40mm 1.57" |
| Steps of spindle speed | stepless | 2-step power shift | stepless |
| Spindle speeds | 40 - 4000 | 20 - 650 75-2500 |
200 - 3500 |
| Spindle motor | 4 Kw 5 Hp |
5.5 Kw 7 1/2 Hp |
|
| Rapid traverse X / Z | 4 / 5 M/min | ||
| Repeatability of 4 way toolpost | 0.008mm | ||
| Vertical 4-position Toolpost changing time (s) | 2.1 | 2.4 | |
| Horizontal 6-position Toolpost changing time | n/a | 3.0 | |
| Pragati 8 position turret | 0.35 sec | 0.35 sec | |
| Diameter of tailstock quill (mm) | 42 | 63 | |
| Travel of tailstock quill (mm) | 110 | 130 | |
| Taper of tailstock quill | M3 | M4 | |
| Net weigh (kg) | 1000 | 1800/1950 | |
| Overall dimensions (mm) | 1790 × 1520 × 1450 | 2300 × 1480 × 1520 2350 × 1480 × 1520 |
|
| Stanadard Equipment includes • full enclosure with sliding door • 3 jaw chuck, manual • worklight • centers • 4 way automatic electric toolpost (vertical axis ) • coolant system Options include: • Pragati 8 position horizontal axis automatic indexing toolpost • concentricity adjustable chucks • collet chucks |