| Search our site Loading
|
 |
Questions ? Call us at 905-624-5536 |
||
| Available with: | ||
 |
 |
 |
| ■ Turcite-B coated on mating surfaces of saddle and guideways | ||
| ■
Precision ballscrew, high rigidity precision compound bearings ensure
accurate positioning and efficient driving. Centralized oil lubricator providing forced automatic lubrication to ballscrews, sliding surfaces. |
||
| ■
High spindle speed with wide variable speed ranges.Low noise
80db, CKE-Z series machine adopting the smart automatic gear changing mechanism enables automatic speed changes among low, medium, high speed ranges without turning off the machine.CKE-i series with independent spindle strcture and frequency converted motor or servo motor enables high spindle speed and stepless spindle changing. |
||
| ■ Flexible control panel enables convenient tool setting. | ||
| ■ Popular full enclosed guards with interlock offer a waterproof and chip-free environment. | ||
| ■ Vertical 4-position toolpost, horizontal 6-position toolpost, quick change toolpost, etc are available for your selection | ||
| ■ Dual electronic handwheels on apron | ||
| ■ Operator console slides on independent guides to allow positioning in the best position for the job at hand. | ||
| ■ Lever on apron for forward / stop / reverse for instictive use in MDI mode | ||
| ■ Joystick on apron for rapid traverse of X and Z. | ||
| ■ Optional pneumaticor hydraulic chuck and tailstock are available. | ||
| ■ Anilam, Fanuc, Siemens, Fagor,etc control systems can be appointed. | ||
CKE6150i
Direct Drive |
CKE6150Z Geared Head |
|
| Max.swing over bed | 500mm 19.68" |
|
| Width of bed | 400mm 15.74" |
|
| Max.length of work piece | 750 / 1000mm 29.57" / 39.37" |
750 / 1000 / 1500 / 2000mm 29.57 / 39.37" / 59" / 78.74" |
| Max.swing over slide | 280mm 11.02" |
|
| X travel | 280 11.02" |
|
| Z travel | 680 / 930mm 26.77" / 36.61" |
680 / 930 / 1430 / 1930mm 26.77 / 38.61 / 56.3 / 76" |
| Spindle nose | A2-8 | D1-8 |
| Chuck size | 250mm 10" |
|
| Taper of spindle bore | 1:20 | |
| Spindle bore | 82mm 3.22" |
|
| Steps of spindle speed | stepless | 3-step actuator |
| Speeds | 30 - 3000 rpm | Low 7 - 135 Med 30 - 550 Hi 110 - 2200 |
| Spindle motor | 11Kw continuous, 15 Kw intermitent 15 / 20 Hp |
7.5 Kw 10 Hp |
| Rapid traverse X / Z | 6 / 10M/min 236 / 393 IPM |
|
| Repeatability of toolpost | 0.008mm 0.0003" |
|
| Vertical 4-position Toolpost changing time | 2.4 seconds | |
| Horizontal 6-position Toolpost changing time | 3.0 seconds | |
| Diameter of tailstock quill | 75mm 2.95" |
|
| Travel of tailstock quill | 150mm 5.9" |
|
| Taper of tailstock quill | M5 | |
| Net weight | 2550/2600 Kg 5620 / 5720 lbs |
2550 / 2600 / 2700 / 2800 Kg 5620 / 5720 / 5940 / 6160 lbs |
| Overall dimensions | 2580×1750×1620 2830×1750×1620 |
2580×1750×1620 2830×1750×1620 3330×1750×1620 3830×1750×1620 |