Shenyang CNC Oil Country lathes

Shenyang CNC Oil Country Lathes
S1-343 Series

To see the manual versions Click Here
smtcl s1-343 cnc oil country lathe with Fagor control

Available with Fagor CNC with built in
cycle for re-cutting API threads.
POWER CHUCKS

in Toronto stock with 10' centers.

Spindle bore: 355mm / 14"	CNC: Fagor 8055
Power driven double chucks	Rapid traverse
Hardened and ground gears in the headstock	Ballscrews on both axes
Lighting System	Pendant control panel
Induction hardened and precision ground guide-ways	4-way indexing quick change turret tooling system
One piece casting – machine bed section	Full rear splash guard
Travelling front chip guard

Height from the spindle center to guide-way face	450 mm	17.7"
Height from the spindle center to the floor	1150 mm	45.2"
Max. outer dia. of pipe to be turned	340 mm	13 3/8"
Max. center distance (with tailstock)	3000mm (power-driven chuck)	120"
Max. turning length (longitudinal travel of apron)	3000mm (power-driven chuck)	120"
Max. transverse travel of saddle	300 mm	11.8"

Headstock
Dia. of spindle bore	355 mm	14"
Steps of spindle speed	12
Range of spindle speed	7 - 301 rpm

Feed system
Longitudinal/Transverse feed of turret and pitch range
Longitudinal (Z-axis)
Feed rate	0-8000 mm/min	0 - 315 IPM
Transverse (X-axis) (Dia. value)
Feed per minute	0.6000 mm/min	236 IPM
Feed per revolution	0.01-50 mm/r	.0004 - 1.97 IPM
Min. setting unit of transverse / longitudinal feed of turret
Longitudinal (Z-axis)	0.001 mm	0.00004"
Transverse (X-axis) (Dia. value)	0.001 mm	0.00004"
Travel of tool post per graduation of hand wheel pulse generator
Longitudinal (Z-axis)	0.001 mm	0.00004"
Transverse (X-axis)	0.001 mm	0.00004"

Tailstock
Dia. of center sleeve	100 mm	4"
Travel of center sleeve	250 mm	10"
Taper of tailstock center	Morse No. 5

Turret
Turret type	Vertical four-station turret
Cross section of tools	40 x 40	1 1/2"
Number of tools	4 pcs.

Z axis servo motor
Type	HA200NC-S	α22/3000i
Power	3.5kW	4.0kW
Max. speed	2000 r/min	3000 r/min

X axis servo motor
Type	HA100NC-S	α12/3000i
Power	2.0kW	3.0kW
Max. speed	2000 r/min	3000 r/min

	S1-343
Swing over bed	35.4"	900 mm
Swing over cross slide	13.38"	350 mm
Turned lengths available	59, 78", 118"	1500, 2000, 3000mm
Spindle speeds, variable in two ranges	7 - 310 rpm
Spindle motor	25 Hp	20 Kw
Feeds - long and cross	0.004 - 0.05 IPR
Tailstock taper	MT-5
Tailstock quill travel	9.84"	250 mm
Weight, approx.	26,750 lbs	12,300 Kg
Steady rest cap	4.5 - 13.8"	115 - 350 mm
Front and rear chucks are standard.