| Search our site: | ![]() |
Questions ? Call us at 905-624-5536 |
||
Our version of a Mini-Mill. Because the CNC system on a machine this size represents about half of its cost, it follows that a small increase in investment in the machine frame has a minimal impact on the price point of the complete package. Therefore we offer a mill that can do some real work! • Travels 22" x 15" x 17 3/4" • Spindle nose to table 21.65" • Spindle Cat-V or BT-40 • Spindle drive 7 1/2 Hp continuous, 10 Hp / 30 minute • Spindle speeds to 8,000 rpm standard. Higher and lower speed ranges are available. • 12 station automatic tool changer. • Rapid traverse 1,400 IPM • Feeds, full 3 axis contouring at 350 IPM and more. • Table load 660 lbs. • WEIGHT 6,820 LBS. |
|||||||
FLG - 25 Travels 25" x 16 1/2" x 18" |
|
![]() |
Click Here to see details of how the FLG-25 is built. Available with the HOT new Anilam 6000 series control. The standard package includes 4 GB hard disk, ethernet, |
FLG-30 Travels 30" x 20" x 24" |
|
![]() |
![]() |
FLG-40 Travels 40" x 22.8" x 24" |
|
FLG-47 Travels 47" x 24" x 24" |
|
![]() |
![]() |
Click here to download our catalogue in pdf format. The latest Adobe Acrobat Reader program will be needed to open this. |
Bridge Type Series |
|
![]() |
![]() Rear View |
This design is remarkable for the minimum distance between the spindle centerline and the bridge, which increases stability and reduces vibration. |
|
|
|
![]() |
Fulland now offers 15,000 and 18,000 rpm spindles with ceramic bearings. These spindles are driven by the Fanuc in - line direct drive motors and can be serviced by our own staff, without the expense and delays of returning the entire motor / spindle assembly to Fanuc in Japan for repair. |