| Search our site: |  |
Questions ? Call us at 905-624-5536 |
||
HH Roberts / Topwell TW-50-MCV Vertical Machining Center with 50" x 22" travels |
 |
 |
|
 |
  |
This is a TW-50-MCV frame basically the way we receive it and prior to fitting the CNC
This machine is also available as an open machining centre with or without table guards. See the TW-50-MCO here We also offer it as a simple CNC bed mill without a tool changer. Often a practical choice for mold makers who have very few tool changes in a day. See the TW-50-MV here |
TW-50-MCV enclosed 50" x 22" x 20" travels table 18" x 68" #40 taper, 15 Hp spindle speeds to 12,000 rpm carousel or arm type toolchangers 600 to 1000 IPM rapid traverse (according to control model and drive selection.) |
| The specs shown are for the MCO series. Mechanically almost all the specs are the same for the MCV series except that the weight and floor space are a bit larger. | |
 Both the side pockets of the chip enclosure can be removed to allow loading of very long parts. This also makes cleanup and service easier. |