|
||||||||||
 |
|||
 |
|||
| Features power feeds long and cross thread cutting gearbox 9" Maximum fixture diameter 14" maximum distance from face of turret to spindle The spindle is mounted in high precision preloaded angular contact ball bearings eliminating radial and end play. Infinitely variable spindle speeds from 0-4000 RPM Fast lever collet chucking with a single movement. Preloaded ball bearing eight-station turret. Solid hardened and ground alloy tool steel bed. Independent electric variable feed. Full bearing carriage with Turcite-B slideway bearing surface. Powerful 5 HP frequency controlled motor Hi / low speed quick change lever for convenience |
CHR-68-EVS |
||
| Spindle Capacity |
With Chuck | 152.44 mm 6" |
| With Expanding Collets | 76 mm 3" |
|
| With Round 5C Collets | 27 mm 1-1/16" |
|
| With Hexagon 5C Collets | 22 mm 7/8" |
|
| With Square 5C Collets | 19 mm 3/4" |
|
| With Step Chucks | 27 to 152.4 mm 1-1/16" to 6" |
|
| Spindle Nose Diameter | 55.6 mm 2.189" |
|
| Spindle Nose Thread I.D/O.D | 5C 10 55.56 mm. 2-3/16" X 10 |
|
| Bar stock diameter (5C collet) | 27 mm 1-1/16" |
|
| Hole through spindle | 31.75 mm 1-1/4" |
|
| Spindle Speeds (Variable) | 0 - 4,000 R.P.M. |
|
| Inverter Spindle Motor | 5 HP |
|
| Travel of Cross Slide | 114 mm 4-1/2" |
|
| Travel of Double Tool Cross Slide | 95 mm 3-3/4" |
|
| Length of Bed | 1105 mm 43-1/2" |
|
| Maximum Fixture Diameter | 230 mm 9" |
|
| Maximum Distance from Face of Turret to Spindle | 355 mm 14" |
|
| Carriage Power Feed Range (per minute) | 6~250 mm 1/4 ~ 10" |
|
| Cross Slide Power Feed Range (per minute) | 9 ~ 160 MM 11/32" ~ 6 1/4" |
|
| Coolant Pump | 1/8HP |
|
| D.C. Feed Motor | 110V , 70W |
|
| Power required | balanced 230/3/60 or 220/1/60 |
|
| Net Weight (approx) | 1760 lbs. 800 kgs |
|
| Gross Weight (approx) | 2110 lbs. 960 kgs |
|
| Machine dimensions ( L x W x H ) | 1800 X 750 X 1700 mm 70" X 30" x 67" |
|
