Erlo C series drill presses

Questions ?
Call us at 905-624-5536.

H.H. Roberts Machinery Limited
1324 Matheson Blvd E., Mississauga, Ontario, Canada. L4W-2Z7, Fax 905-624-9065

Download the Erlo full line catalog

HH Roberts has been the exclusive Canadian agent for Erlo since 1967

C Series
Machines range with 6 series, in which we would like to point out the design and the hardness of these machines, as well as their performances. We manufacture machines with the following basic options:

Capacity: 18, 25 or 30 mm. in steel

Transmission: V-belt or electronic variator

Feed: Manual

Tthe spindles on many of these models can be automated with the Hydroblock automatic cycler with rapid approach, drill or tap, and retract. It can also rapid advance through the hollow section of a tubular part to drill both walls as quickly as possible.

Need parts or parts manuals ?? Click Here to download manuals.

Base Model - C SERIES Drill Press

This is the base model of the C Series. It has a quiet, smooth step pulley, V-belt drive.

Below the C-25 with Hidroblock automatic feed cycling device.
Hidroblock automatic power feed cycler

	C Series drill press
MACHINE TYPE	ROUND COLUMN Drill Presses
	C.18	CR.18	C.25	CR.25	C.30	CR.30
Drilling capacity in mild steel	18		25		30
Tapping capacity	M.14		M.18		M.25
TRANSMISSION	V-BELT
FEED	Manual (Hydroblock Auto-Cycle optional)
FEED NUMBER	none
Number of speeds	10
SPEEDS RANGE	295 - 4800
MAIN MOTOR POWER	0.7 / 1.2 HP		1 / 1.5 HP		1.2 / 2 HP
MORSE TAPER	MT.2		MT.3
SPINDLE TRAVEL mm.	120 mm
COLUMN-SPINDLE DISTANCE mm.	250
COLUMN DIAMETER mm.	Ø 110
Worklight	OPTIONAL
Rotating and tilting table	OPTIONAL
Tool ejector	YES
Coolant system	NO	YES	NO	YES	NO	YES
Low Voltage controls	YES
Fine feed handwheel	OPTIONAL
Adjustable depth stop	YES

CV Series

The CV series has a belt drive with electronic variable speeds

MACHINE TYPE	ROUND COLUMN DRILLING MACHINES
Models	CV.18	CVR.18	CV.25	CVR.25	CV.30	CVR.30
drilling capacity in mild steel	18 mm		25 mm		30 mm
tapping capacity	M.14		M.18		M.25
spindle drive	electronic variator
feeds	Manual (Hydroblock Auto-Cycle optional)
number of feeds	none
variable speeds range	120-4000 rpm
main motor	0.7 / 1.2 Hp		1 / 1.5 Hp		1.2 / 2 Hp
spindle Morse taper	MT.2		MT.3
spindle stroke	120 mm
spindle c/l to face of column	250 mm
column diameter .	110 mm
worklight	Optional
rotating and tilting table	Optional - fixed tabe standard
tool ejector	Yes
coolant system	No	Yes	No	Yes	No	Yes
low voltage controls	Yes
fine feed handwheel	Optional
adjustable depth stop	Yes