Erlo SE Geared Head Bench Drill Presses

Questions ?
Call us at 905-624-5536

H.H. Roberts Machinery Limited
1324 Matheson Blvd E., Mississauga, Ontario, Canada. L4W-2Z7, Fax 905-624-9065

Erlo SE Series Drills with Geared Head

Bench and cabinet drills with 1" and 1 3/16" capacity models

"R" in the model designator indicates "coolant" ( refrigeration )

SERIES	SE & SER
MACHINE TYPE	BENCH TYPE DRILLING MACHINES
MODELS	SE.25	SER.25	SE.30	SER.30
DRILLING CAPACITY	25		30
TAPPING CAPACITY	M.18		M.25
TRANSMISSION	Hardened and ground gears
FEEDS / CLUTCH	MANUAL
SPEEDS RANGE & No. (rpm.)	8 from 78 - 3672
OPTIONAL LOW SPEED RANGE	8 from 36 to 1800
MAIN MOTOR POWER	1.1 / 1,6 HP		1,5 / 1.9 HP
MORSE TAPER	MT 3
SPINDLE TRAVEL mm.	120 mm
COLUMN-SPINDLE DISTANCE mm.	256
COLUMN DIAMETER mm.	Ø 98
LIGHT	OPTIONAL
ROTATING AND TILTING TABLE	OPTIONAL
TOOL EJECTOR	YES
COOLANT EQUIPMENT	NO	YES	NO	YES
ELECTRICAL EQUIPMENT AT LOW VOLTAGE	YES
SENSITIVE HANDLE	OPTIONAL
ADJUSTABLEDEPTH STOP	YES

SE Series Drill Presses

shown with optional cabinet base


More variations of table configurations that are available on this model can be seen on the standard S Series page

Options	Ordering code
DRILL GUARD WITH STOP MICROSWITCH	STANDARD
WORKLIGHT	10010
FRONT WHEEL FOR FINE SENSITIVE FEED	10020
DIGITAL SPEED READER	10021
TURNING FOR TAPPING	10030
TAPPING SYSTEM BY CYCLE TIMER	10040
TAPPING SYSTEM BY LEAD SCREW WITH BRAKING DEVICE (incl. 1 lead screw)	10070
ADDITIONAL LEAD SCREWS	10080
BASE CABINET WITH DOOR AND SHELVES	10084
FIXED INTERMEDIATE TABLE	10087
ROTATING INTERMEDIATE TABLE	10088
ROTATING AND TILTING INTERMEDIATE TABLE	10089
MULTISPINDLE HEADSTOCK COUPLING WORKS	10090
MULTISPINDLE HEADSTOCK GUIDING	10100
COLUMN RISER	10110
DRILL GUARD FOR MULTISPINDLE HEADSTOCKS	10115
PNEUMATIC BALANCED FOR MULTISPINDLE HEADSTOCK	10125
VDE ELECTRICAL EQUIPMENT	10131
COOLANT OF EACH SPINDLE OF THE MULTISPINDLE HEADSTOCK	10150
LOW SPEED RANGE	81000