|
||||||||||||||
| Download the Erlo full line catalog |
 |
HH Roberts has been the exclusive Canadian agent for Erlo drill presses since 1967 |
|
 |
TC Series Drill Presses: All the spindle drive gears are hardened and ground and are lubricated by a built in pump. These drill presses are available with or without power feeds. Optionally they can be equipped with the Hidroblock automatic spindle cycling feeds for higher production applications Download the TC and TCA series catalog  |
|
| The TC and TCA series drill presses have been the best selling production drills in Canada for over 35 years. We keep a good stock of the TC, TCA, TS and TSA models in stock, as well as a few of the bench models. Erlo's years of experience can offer solutions to just about and drilling challenge you have. They will design and build turn key systems. | Need parts or parts manuals ?
Click Here |
TCA Series Drill Presses with power feeds |
TCA-40 |
TCA-45 |
TCA-50 |
TCA-70 |
|||||||
Drilling cap in mild steel |
40mm 1 9/16" |
45mm 1 3/4 |
50mm 2" |
70mm 2 3/4" |
||||||
Tapping capacity |
M.32 1 1/4 |
M35 1 3/8 |
M.45 1 49/64 |
M.60 2 23/64 |
||||||
Spindle drive |
geared | |||||||||
Feed type and clutch |
mechanical | |||||||||
No. of feeds |
4 |
4 | 4 | 6 | ||||||
Speed range & No. (rpm.) |
(9) 82-1524 |
(9) 45 - 1115 | (9) 54-1338 |
(12) 42-1486 |
||||||
Main motor |
2 HP | 3 Hp | 4 HP |
7,5 HP |
||||||
Spindle taper |
MT.4 | MT 4 | MT 4 | MT 5 | ||||||
Spindle stroke |
240mm 9.44" |
240mm 9.44" |
260mm 10.23" |
300mm 11.81" |
||||||
Spindle C/L to face of column |
360mm 14.17" |
360mm 14.17 |
400mm 15.74" |
420mm 16.5" |
||||||
Column diameter |
175mm 6.89" |
175mm 6.89" |
200mm 7.87" |
220mm 8.66" |
||||||
Work light |
Yes |
|||||||||
Rotating and tilting table |
Yes |
|||||||||
Tool ejector |
Yes |
|||||||||
Coolant system |
Yes |
|||||||||
Low voltage controls |
Yes |
|||||||||
Fine feed handwheel |
Yes |
|||||||||
Adjustable depth stop |
Yes |
|||||||||
TCE Series Drill Presses with power feeds via electomagnetic clutch |
