Erlo fixed table heavy duty drill presses

Questions ?
Call us at 905-624-5536

H.H. Roberts Machinery Limited
1324 Matheson Blvd E., Mississauga, Ontario, Canada. L4W-2Z7, Fax 905-624-9065

HH Roberts has been the exclusive Canadian agent for Erlo drill presses since 1967
		Any of the bench type or round column drill presses can be manufactured in the M series style. Because the table is fixed this series is best suited to work with big pieces like moulds, dies etc. Models with A in the designator have power Power feed styles. The spindle can also be automated with the Hydroblock automatic cycler with rapid approach, drill or tap, and retract. It can also rapid advance through the hollow section of a tubular part to drill both walls as quickly as possible. Most of these models are available with cabinet style bases Need parts or parts Manuals ?? Click Here to download Manuals.

	MS / MSR / MSER / MSEAR Series Drill Presses
	MS / MSR.18	MS / MSR.25		MSE / MSER.25		MS / MSEAR.25
Drilling capacity in mild steel	18	25		25		25
Tapping capacity	M.14	M.18		M.22		M.22
Spindle drive	V-BELT			hardened and ground steel GEARS
Power feed style/Clutch style	Manual					AUTOMATIC
No. of power feeds	-					2
No. of spindle speeds and range	(10) 295-4800				(8) 78-3672
Main motor	0,7/1,2	1/1,5		1,1/1,6	1,5/1,9	1,1/1,6
Spindle taper	MT.2		MT.3
Spindle stroke mm.	120 mm
Distance: spindle to column	256 mm
Column Diameter mm.	98
Worklight	OPTIONAL
Built in tool ejector	Yes
Coolant system	Yes on "R" model
Low voltage controls	Yes
Fine feed handwheel	OPTIONAL
Adjustable depth stop	Yes

	MTSR / MTSAR / MTSER
	MTSR.32	MTSAR.32	MTSER.32	MTSER.35
Drilling capacity in mild steel	32	32	32	35
Tapping capacity	M.30	M.30	M.30	M.32
Spindle drive	hardened and ground steel GEARS
Power feed style/Clutch style	Manual	AUTOMATIC (MECHANICAL)	AUTOMATIC / ELECTROMAGNETIC
No. of power feeds	-	3	3
No. of spindle speeds and range	(8) 90-2520
Main motor	1/1,5 HP	1/1,5 HP	1/1,5 HP	1,2/2 HP
Spindle taper	MT.4
Spindle stroke mm.	160 mm
Distance: column to spindle	300 mm
Column Diameter	125 mm
Worklight	OPTIONAL
Built in tool ejector	Yes
Coolant system	Yes
Low voltage controls	Yes
Fine feed handwheel	NO	OPTIONAL
Adjustable depth stop	Yes

	MTCA / MTCE
MODELS	MTCA.40 MTCE.40
Drilling capacity in mild steel	40
Tapping capacity	M.42
Spindle drive	hardened and ground steel GEARS
Power feed style	Manual (MTC) / AUTOMATIC (MTCA-MTCE)
Clutch style	MECANIC (MTCA) / ELECTROMAGNETIC (MTCE)
No. of power feeds	4
No. of spindle speeds and range	(9) 82-1524
Main motor	2 HP
Spindle taper	CM.4
Spindle stroke mm.	240
Distance: column to spindle	360 mm
Column Diameter mm.	175
Worklight	Yes
Table	FIXED TABLE/DISPLACEABLE HEADSTOCK
Built in tool ejector	Yes
Coolant system	Yes
Low voltage controls	Yes
Fine Power feed style handwheel	Yes
Adjustable depth stop	Yes