Search our site:
 
HH Roberts Machinery Ltd
Questions ?
Call us at 905-624-5536
 
   
   

HH Roberts has been the exclusive Canadian agent for Erlo since 1967
Erlo C series belt drive floor drill
 C Series
Machines range with 6 series, in which we would like to point out the design and the hardness of these machines, as well as their performances. We manufacture machines with the following basic options:

Capacity: 18, 25 or 30 mm. in steel

Transmission: V-belt, gears or electronic variator

Feed: Manual or automatic


Tthe spindles on many of these models can be automated with the Hydroblock automatic cycler with rapid approach, drill or tap, and retract.  It can also rapid advance through the hollow section of a tubular part to drill both walls as quickly as possible.
Download the S series catalogAcrobat
Download the Erlo General Catalog in English Acrobat
Download the Erlo General Catalog in French/Spanish Acrobat

Need parts or parts manuals ??   Click Here to download manuals.

Base Model  -  C SERIES Drill Press
Erlo C-25 drill
This is the base model of the C Series. It has a quiet, smooth step pulley, V-belt drive.

Below the C-25 with Hidroblock automatic feed cycling device.
Hidroblock automatic power feed cycler
C Series drill press
MACHINE TYPE
ROUND COLUMN Drill Presses
 
C.18
CR.18
C.25
CR.25
C.30
CR.30
Drilling capacity in mild steel
18
25
30
Tapping capacity
M.14
M.18
M.25
TRANSMISSION
V-BELT
FEED
Manual (Hydroblock Auto-Cycle optional)
FEED NUMBER
none
Number of speeds
10
SPEEDS RANGE
295 - 4800
MAIN MOTOR POWER
0.7 / 1.2 HP
1 / 1.5 HP
1.2 / 2 HP
MORSE TAPER
MT.2
MT.3
SPINDLE TRAVEL mm.
120 mm
COLUMN-SPINDLE DISTANCE mm.
250
COLUMN DIAMETER mm.
Ø 110
Worklight
OPTIONAL
Rotating and tilting table
OPTIONAL
Tool ejector
YES
Coolant system
NO
YES
NO
YES
NO
YES
Low Voltage controls
YES
Fine feed handwheel
OPTIONAL
Adjustable depth stop
YES

CV Series
Erlo CVR electron variable speed dril
 The CV series has a belt drive with electronic variable speeds
MACHINE TYPE
ROUND COLUMN DRILLING MACHINES
Models
CV.18
CVR.18
CV.25
CVR.25
CV.30
CVR.30
drilling capacity in mild steel
18 mm
25 mm
30 mm
tapping capacity
M.14
M.18
M.25
spindle drive
electronic variator
feeds
Manual (Hydroblock Auto-Cycle optional)
number of feeds
none
variable speeds range
120-4000 rpm
main motor
0.7 / 1.2 Hp
1 / 1.5 Hp
1.2 / 2 Hp
spindle Morse taper
MT.2
MT.3
spindle stroke
120 mm
spindle c/l to face of column
250 mm
column diameter .
110 mm
worklight
Optional
rotating and tilting table
Optional - fixed tabe standard
tool ejector
Yes
coolant system
No
Yes
No
Yes
No
Yes
low voltage controls
Yes
fine feed handwheel
Optional
adjustable depth stop
Yes

CH Series
The CH series are leadscrew tapping machines with step pulley V belt drives.
MACHINE TYPE
Leadscrew Tapping Machines
MODELS
CH.18
CHR.18
CH.25
CHR.25
CH.30
CHR.30
Drilling capacity in mild steel
M.14
M.18
M.25
Tapping Capacity
18
25
30
Spindle drive
V-Belt
Feeds
None - AUTOMATIC TAPPING:  Manual (Hydroblock Auto-Cycle optional)
No. of feeds
none
No of speeds and range
(10) 295-4800
Main motor
1 HP
1,5 HP
2 HP
Spindle Morse taper
MT.2
MT.3
Spindle stroke
90 mm
Spindle c/l to face of column
250
Column Diameter
110
Work light
Optional
Rotating and tilting table
Optional
Tool ejector
No
Coolant system
No
Yes
No
Yes
No
Yes
Low voltage controls
Yes
Fine feed handwheel
Optional
Adjustable depth stop
Yes