Search our site:
 
HH Roberts Machinery Ltd
Questions ?
Call us at 905-624-5536
 
   
   

Erlo Geared head drills
 HH Roberts has been the exclusive Canadian agent
for Erlo Drill Pressessince 1967
Erlo C series belt drive floor drill press
 Erlo TS Series Drill Presses
TheTS series of drills from Erlo are the most economical of the geared head types.
All the spindle drive gears are hardened and ground and run in an oil bath.
These drills are available with or without power feeds.
Optionally they can be equipped with the Hidroblock Automatic spindle cycling feeds for higher production applications

Download the TS-25 and 30 series catalogacrobat
Download the TS-32 and 35 series catalogacrobat
Download the TS-40 series catalogAcrobat
Download the Erlo General Catalog in English acrobat
Download the Erlo General Catalog in French/Spanish Acrobat

Need parts or parts manuals ??   Click Here to download manuals.

TS-25 and 30 Series
Erlo TS-25 Geared head floor drill press
Erlo TS-25 Drill Press
1" and 1.2" capacity
Geared head drill press with manual feed
 
TS.25
TSR.25
TS.30
TSR.30
Drilling capacity in mild steel
25mm
1"
30mm
1 3/16"
Tapping capacity
M.22
M.25
Transmission
hardened and ground steel gears
Feed
Manual (Hydroblock Auto-Cycle optional)
Number of feeds
None
Speed range
8 speed from  78 to 3672
Spindle motor, 2 speed
1.1  /   1.6 HP
1,5  /  1.9 HP
Morse taper
MT.3
spindle stroke
120 mm
472"
Spindle C/L to face of column
250 mm
9.84"
Column diameter mm.
110mm
4.33"
Worklight
Optional
Rotating and tilting table
Optional
Built in tool ejector
Yes
Coolant system
No
Yes
No
Yes
Low voltage control panel
Yes
Sensitive feed handwheel
Optional
Adjustable depth stop
Yes

Erlo models TS-32 and 35 geared head drill presses
Erlo TS-32 geared head floor drill
 Geared head drill press with manual feed, without built in coolant.
 
TS.32
TSR.32
TS.35
TSR.35
Drilling capacity in mild steel
32mm
1 1/4"
35mm
1 3/8"
Tapping capacity
M.30
M.32
Transmission
hardened and ground steel gears
Feed / clutch
manual
Spindle speeds
8 from 90 to 2520 rpm
Spindle motor, 2 speed
1   /   1.5 Hp
1.2  /  2 Hp
Morse taper
MT.4
spindle stroke
160 mm
6.3"
Spindle C/L to face of column
300 mm
11.8"
Column diameter
125mm
4.92"
Worklight
Optional
Rotating and tilting table
Optional
Built in tool ejector
Yes
Coolant system
No
Yes
No
Yes
Low voltage control panel
Yes
Sensitive feed handwheel
Optional
Adjustable depth stop
Yes

Erlo models TSA 25 and 30 drill presses
Erlo TSA-25 Geared Head Pedestal Drill with power feeds
TSR-32
1 1/4" and 1 5/8" capacity 
Geared head drill press with manual feed
 
TSA.25
TSAR.25
TSA.30
TSAR.30
Drilling capacity in mild steel
25mm
1"
30mm
1 3/16"
Tapping capacity
M.22
M.25
Transmission
hardened and ground steel gears
Feed / clutch
Automatic
Number of feeds
2
Spindle speeds
8 from 78 to 3672 rpm
Spindle motor, 2 speed
1.1   /   1.6 Hp
1.5  /  1.9 Hp
Morse taper
MT.3
spindle stroke
120 mm
4.72"
Spindle C/L to face of column
250 mm
9.84"
Column diameter mm.
110mm
4.33"
Worklight
Optional
Rotating and tilting table
Optional
Built in tool ejector
Yes
Coolant system
No
Yes
No
Yes
Low voltage control panel
Yes
Sensitive feed handwheel
Optional
Adjustable depth stop
Yes

TSAR 32 and 35
Erlo TSAR geared head drill with mechanical feed clutch
TSAR-30
1 1/4" and 1 5/8" capacity
Geared head drill press with power feeds
 
TSA.32
TSAR.32
TSA.35
TSAR.35
Drilling capacity in mild steel
32mm
1 1/4"
35mm
1 3/8"
Tapping capacity
M.30
M.32
Transmission
hardened and ground steel gears
Feed / clutch
Automatic / Nechanical
Number of feeds
3
Spindle speeds
8 speeds from 90  to  2520 rpm
Spindle motor
1/1,5 HP
1,2/2 HP
Morse taper
MT.4
spindle stroke
160 mm
6.3"
Spindle C/L to face of column
300 mm
11.8"
Column diameter mm.
125mm
4.92"
Worklight
Optional
Rotating and tilting table
Optional
Built in tool ejector
Yes
Coolant system
No
Yes
No
Yes
Low voltage control panel
Yes
Sensitive feed handwheel
Optional
Adjustable depth stop
Yes

TSE
Erlo TSE-32 Geared Head floor drill press with electromagnetic clutch feeds
Erlo TSE geared head drill presses
with electromagnetic feed clutch
 
TSE.32
TSER.32
TSE.35
TSER.35
Drilling capacity in mild steel
32mm
1  1/4"
35mm
1  3/8"
Tapping capacity
M.30
M.32
Transmission
hardened and ground steel gears
Feed / clutch
Automatic / Nechanical
Number of feeds
3
Spindle speeds
8 from 90 to 2520 rpm
Spindle motor
1 /  1.5 Hp
1.2  /  2 Hp
Morse taper
MT.4
spindle stroke
160 mm
6.3"
Spindle C/L to face of column
300 mm
11.8"
Column diameter mm.
125mm
4.92"
Worklight
Optional
Rotating and tilting table
Optional
Built in tool ejector
Yes
Coolant system
No
Yes
No
Yes
Low voltage control panel
Yes
Sensitive feed handwheel
Optional
Adjustable depth stop
Yes