• Variable speed electronic drive

• Digital spindle speed display

• Digital drilling depth display ( electronic verier built in ) trips feed in drilling and reverses the
      spindle in tapping cycles

• Four power feeds actuated by pushbuttons in each feed lever, engaged by electromagnetic
      clutch. with release built into the depth gauge.

• Semi-automatic tapping cycle. Spindle runs forward to tap and reverses when the
      pushbutton in the feed lever is pushed, then reverses again at the top of the stroke,
      ready for the next hole.

• Worktable can be rotated ±180°and tilted ±45°

• Both motor-driven and manually operated lifting system of worktable.

• Coolant system

• Adjustable depth stop with inch and metric scales

• Table has double acting linked clamps with safety interlock to power elevation

• Drill speed chart for iron and steel on faceplate

• Drill chuck guard with built in switch to CE standards

• Available with 600/3/60 electrics, CSA approved, and 230/3/60

• Standard equipment includes a 1/2" keyed drill chuck with arbour, a MT4-3, MT4-2 and
      MT2-1 sleeves, drifts, anchor bolts and manual.

• Built in worklight

• CE, CSA, UL approved main electrical components

• Ideal choice for single piece, small batch and mass production for drilling, counter boring, reaming, tapping, spot facing etc.