 
Load and unload die sets from presses and storage shelves effortlessly
For info on our manual walk behind model now also available with 1,000 lb capacity: CLICK HERE |
Hansford Parts And Products, manufacturer of the well-known Hansard
Die Handler, offers a new labour-saving device to load and unload
dies under power. This cart has battery power to raise
its platform, as well as push and pull die sets, on
and off presses and storage shelves. This cart is manually
moved around, and eliminates the back strain experienced
by manually pushing and pulling die sets onto and off
of fork lift trucks, presses and shelves.
Features
-
2,500 lbs. capacity at 18” load center
-
Powered push/pull mechanism for die load/unload
-
Welded and utilized platform with fork support
-
2 roller lift chains – 9,000 lbs. yield each
-
Full
feature tiller handle with keylock switch, stepless forward/reverse
control, lift and lower control, horn button, safety belly button switch
-
225 AH batteries with 25 amp on-board charger with powered vent, battery indicator, hour meter, low charge lift limit
-
24v operation, emergency disconnect button
-
Hydraulic check valve on lift cylinder
|
| |
|
|
SPECIFICATION
|
Model Number |
Wheel
Size
Front |
Wheel
Size
Drive |
Platform
Length Dim. A |
Platform
Width Dim. B |
Legs ID |
Legs OD |
PWB3063 |
5" x 3" |
10" x 3" |
30" |
32" |
24 5/8" |
32 1/2" |
Model Number |
Overall
Length
Dim. C |
Overall
Height
Dim. D |
Load
Center |
Platform
Lowered
Height |
Platform
Raised
Height
|
Machine
Weight |
Maximum
Die Weight |
PWB 3063 |
63" |
81" |
18" |
11" |
63" |
1,850 lbs. |
2,500 lbs. |
|
|
|
|
