 |
Questions ? Call us at 905-624-5536 |
||
Item |
Description | Remarks |
HA-1 |
Additional Die Holder Assembly | Mounts to Upper Platen |
| HA-2 | Leveling Jack Assembly | For Lifting Machine Off Its. Casters and Leveling Same for Machine Operations |
| HA-3 | Leveling Jack Assembly | For Use with Machine Equipped with HA-17 Assembly |
| HA-6 | Left-Hand Engagement Safety Switch | Must be Depressed with Power Switch to Operate Machine Under Power General Purpose Wired |
| HA-6A | Left-Hand Engagement Safety Switch | J.I.C. Wired |
| HA-7 | Die Mounting Plate Spacer | 5" Thick, 1 Required for Each Die Holder |
| HA-10 | Three Phase Electrics to J.I.C. Standards | In Lieu of General Purpose Type |
| HA-17 | Set of Four (4) Extra Length Lead Screws | Increases Open Height and Vertical Travel by 8". For Use with Standard Machine that is Furnished with Casters |
| HA-18 | Set of Four (4) Extra Length Lead Screws | Increases Open Height and Vertical Travel by 8". For Use with Machine that is to be Equipped with a Stationary Base |
| HA-19 | Set of Four (4) Foot Extensions | Makes Die Handler Stationary. Install in Place of Casters |
| HA-25 | Set of 2" Lead Screws | In Lieu of Standard 1-1/2" Lead Screws—Provides 20" Vertical Trave |
| HA-25A | Set of 2" Lead Screws | In Lieu of Standard 1-1/2" Screws—Provides 28" Vertical Travel |
| HA-32 | Stationary Base for Die Handler | Accommodates 6000 lb. Static Die Load for Model 1020 |
| HSA-32 | Extra Strength Right-Hand Trunnion | Increases Turnover Torque to 9000 in. Ibs. Prerequisite for HA-36 |
| HA-33 | Stationary Base for Die Handler | Accommodates 6000 lb. Static Die Load for Model 1021 |
| HA-36 | Motorization of the Turn-Over Mechanism | Provides Rotation of the Upper Platen under Power. HSA-32 Required. |
| HSA-16 | Export Crating | Model 1020 |
| HSA-17 | Export Crating | Model 1021 |
| Model | Max Die Weight |
Platen Size |
| 1021 | 3,000 to 8000 lbs |
30" x 64" |
| 1020 | 3,000 to 6,000 lbs |
25" x 44 1/2" |
| 1018 | 400 lbs |
17" x 26" |
| Accessories |