| Search our site Loading
|
 |
Questions ? Call us at 905-624-5536 |
||
| Model | DY-660G | DY-760G | |
| Swing | Swing over bed | 26" 660mm |
30" 760mm |
| Distance between centers | 40" to 236" 1000 / 1500 / 2000 / 2500 / 3000 / 4000 / 5000 / 6000mm |
||
| Height of center (over bed) | 13" 330mm |
15" 380mm |
|
| Swing over cross slide | 139.4"" 470mm |
25.6" 570mm |
|
| Over gap swing | 40" 1000mm |
43.3" 1100mm |
|
| Bed width | 410mm | ||
| Headstock | Spindle nose | D1-8 / D1-11(opt) | |
| Spindle bore | 4.1" optionally 5.1 102mm / 130mm(opt) |
||
| Spindle speed (rpm) | 25 ~ 1250rpm | ||
| Number of spindle speed | 12 Change | ||
| Feeds- Thread | Leadscrew | Ø45 mm. 4T.P.I. or 6 pitch | |
| Number of feed changes | 36 | ||
| Longitudinal feed range | 0.05~0.70 mm/rev | ||
| Cross feed range | 0.025~0.35mm/rev | ||
| Inch threads | 2~28 T.P.I. | ||
| Metric threads | P0.8~14mm | ||
| D.P. No. / range | D.P 4~56 | ||
| Module pitches No. / range | MOD 0.5~7 | ||
| Tool slide | Cross slide travel | 360 mm | |
| Compound rest travel | 255 mm | ||
| Tailstock | Spindle travel | 180mm | |
| Spindle diameter | 75mm | ||
| Taper of center | MT#5 | ||
| Motor | Main motor | 10HP | |
| Coolant pump | 1/8HP | ||