Questions ?
Call us at 905-624-5536
Call us at 905-624-5536
| Search our site: | |
Questions ? Call us at 905-624-5536 |
||
|
Cyclematic CP-27 EVS
Electronic Variable Speed Finishing Lathe |
 Shown with optional double tool cross slide |
5C collet nose in spindle.
Available with compound slide or double acting lever slide.
See below.
 |
 |
Double tool Cross Slide The cross slide base provides the needed rigidity when forming, cutting off, or turning with the straight and taper turning slide attachment. The cross slide is easily operated by a hand lever. Two threaded feed stops are provided for fine adjustment of each tool position. Tool No:CHR-68-12 For:CTS-27EVS, Chr-68EVS, CP-27EVS, CTL-27EVS |
 |
Compound Slide The compound slide rest can be readily applied to the CYCLEMATIC Second Operation Machine for screw feed precision turning, facing and boring operations. The large diameter feed screws are hardened and mounted on preloaded ball bearings. The feed screw dials are2" in diameter. Both dials give direct readings in thousandths and are adjustable for Zero settings. Tool No: CTS-27-10 For CTS-27EVS, CTL-27EVS, CP-27EVS |
|
Spindle Capacity |
With Round 5C Collets |
27 mm |
1-1/16" |
| With Hexagon 5C Collets |
22 mm |
7/8" |
|
| With Square 5C Collets |
19 mm |
3/4" |
|
| With Step Chucks |
152.4 mm |
6" |
|
| With Jaw Chucks |
127 mm |
5" |
|
| With Expanding Collets |
76 mm |
3" |
|
| Bar stock diameter (5C collet) |
27 mm |
1-1/16" |
|
| Hole through spindle |
31.75 mm |
1-1/4" |
|
| Spindle Nose Diameter |
55.6 mm |
2.189" |
|
| Spindle Nose I.D/O.D |
5C (10) / 4° Taper |
||
| Spindle Speeds |
0-4000 R.P.M ( 6,000 optional ) |
||
| Swing Over Bed |
229 mm |
9" |
|
| Length of Bed from Face of Spindle |
254 mm |
10" |
|
| Inverter Spindle Motor |
1 HP |
||
| Net Weight (approx) |
300 kgs |
660 lbs. |
|
| Gross Weight (approx) |
370 kgs |
820 lbs. |
|
| Machine dimensions (L x W x H) |
870 x 870 x 1550 mm |
35" x 35" x 61" |
|
|
Standard Equipment / Configuration: |