|
CTL-618EVS |
Spindle
Capacity |
With Chuck Over Carrage |
127 mm 5" |
| With Chuck Over Bed |
152 mm 6" |
| With Expanding Collets |
76 mm 3" |
| With Round 5C Collets |
27 mm 1-1/16" |
| With Hexagon 5C Collets |
22 mm 7/8" |
| WithStepChucks |
27 to 152.4 mm 1-1/16" to 6" |
| Spindle Nose Diameter |
55.6 mm 2.189" |
| Spindle Nose I.D/O.D |
5C - 10° / 4° Taper |
| Spindle Speeds (Variable) |
0-4000 R.P.M. |
| Inverter Spindle Motor |
5 HP |
| Hole Through Spindle |
31.75 mm 1-1/4" |
| Bar stock diameter (5C collet) |
27 mm ( 1-1/16" ) |
| Hole through spindle |
31.75 mm 1-1/4" |
| Distance Between Centers |
457 mm 18" |
| Swing Over Bed |
280 mm 11" |
| Swing Over Carriage |
230 mm 9" |
| Swing Over Cross Slide |
152.4 mm 6" |
| Carriage Power Feed Range |
8~178 mm 5/16" ~ 7" |
| Cross Slide Power Feed Range |
5~102 mm ( 3/16" ~ 4* |
| Cross Slide Travel |
152.4 mm ( 6" ) |
| Quick-action Compound Slide Travel |
2.5 mm ( 0.1" ) |
| Compound Slide Travel |
76 mm ( 3" ) |
| Coolant Pump |
1/8HP |
| D.C. Feed Motor |
220V , 70W |
Power Supply |
230/3/60 or 220/1/60 |
| Tailstock Spindle Travel |
95 mm ( 3-3/4" ) |
| Range of Threads in Gear Box |
11-108 per inch |
| Number of Thread Changes |
( 36 Metric ) 36 |
| Net Weight (approx) |
(1010 kgs) 2220 lbs. |
| Machine dimensions (L x W x H) |
1800 x 750 x 1700 mm
( 70" x 30" x 67" ) |
