Search our site:
 
HH Roberts Machinery Ltd
Questions ?
Call us at 905-624-5536

Shun Chuan TML Series:
16.14" Swing
The Shun Chuan TML 16 x 60 Engine lathe
To download the complete factory catalog,
Click here
logo07

FEATURES
All casting are properly stabilized and stress relieved.
Bed ways are hardened & ground to min. HS-70
Turcite B coating between the bed and carriage.
Extremely low noise level.
Foot brake paddle provied.
Built-in coolant pump & fitting provided.
Wider bed way which give vibration-absorbent.
The main spindle of the Shun Chuan TML series lathes with 52 mm / 2 inch bore
  TML-1640 TML-1660
Capacity Height of  centers 205mm   8.07"

Swing over bed

410mm    16.14"
Swing in gap 583mm    22.95"
Swing over cross slide 264mm     10.39"
Distance between centers

1000mm    40"

 1500mm   60"
Width of bed 260mm    10.236"
Gap width in front of faceplate 135m     5.31" 225mm    8.85"
Headstock &
Main spindle		 Spindle nose,  Internal taper D1-6 , MT. No.6
Spindle center sleeve MT. No.6 x MT No.4
Spindle  bore 52.5mm    2.066"
Spindle speed: Gear steps/Range
12 steps     36 ~ 1800 R.P.M.
L 36 50 70 105
M 130 180 250 380
H 620 900 1200 1800
Carriage Length on bed /  Width of carriage 513mm (20.19") / 412mm (16.22")
Cross slide  travel 220mm (8.6")
Top slide  travel 140mm (5.5")
Threads &
Feeds		 Whitworth  threads: Kinds/Range 45 Kinds / 2 ~ 72  T.P.I.
Metric threads: Kinds/Range 39 Kinds / 0.2 ~ 14mm
D.P. threads: Kinds / Range 21 Kinds / 8 ~ 44  D.P.
M.P. threads: Kinds / Range 18 Kinds / 0.3 ~ 3.5 M.P.
Longitudinal feeds 0.05 ~ 17 mm (0.002" ~ 0.0067")
Cross  feeds 0.025 ~ 0.85 mm (0.001" ~  0.034")
Tailstock Quill  diameter 52mm (2.047")
Quill  travel 152mm (6")
Taper of center MT. No.4
Motor Main spindle 5HP
Coolant  pump 1/8HP
Measurement Weight (Net /  Gross) Approx. 1500kgs / 1650kgs 1600kgs / 1750kgs
Packing  sizes Length 2270mm (89.4") 2785mm (109.7")
Width x Height Width 1120mm (44.1") x Height 1745mm (68.7")
Specification  subject to change without notice