Search our site
Loading
  
HH Roberts Machinery Ltd
Questions ?
Call us at 905-624-5536

    
Baxter 475-M Double column Semi automatic mitre cutting bandsaw 18 Inch capacity
Baxter 475-M mitre cutting double column semi automtic bandsaw, side view
click an image for a larger view

The model 475M has a large capacity for cutting structural profiles and pipes
. Head miters out to 60 degrees by hydraulics with a digital angle display.
The blade is canted at 4 degrees to aid in cutting structural profiles and flats.
CUTTING CAPACITY at 0°
Round at 0° 18″ (460 mm)
Rectangular at 0° 17¼”H x 25½”W (438 x 648 mm)
Rectangular (maximum height) at 45° 17¼”H x 15¾”W (438 x 400 mm)
Rectangular (maximum width) at 45° 13”H x 18½”W (330 x 470 mm)
Rectangular (maximum height) at 60° 17¼”H x 9½”W (438 x 241 mm)
Rectangular (maximum width) at 60° 14½”H x 11¼”W (368 x 285 mm)
SPECIFICATIONS
Blade Size 1 1/4″ x 16′ 6″ (34 x 5030 mm)
Blade Speeds (continuously variable) 60 to 400 ft/min (18 to 122 m/min)
Blade Tension (spring compensated) 30,000 psi (207 MPa)
Blade Guides Carbide with rollers
Table Height 26 1/4″ (670 mm)
Maximum Work Load 5,000 lb. (2050 kg)
Machine Weight 2,800 lb. (1090 kg)
Overall Dimensions 9′ x 5′ x 8′(2750 x 1500 x 2400 mm)
DRIVE
Blade Drive 5 Hp (3.75 kW)
Hydraulic Drive 2 Hp (.75 kW)
Voltages available (three phase) 575, 460, 230 and 208

Features and standard equipment

  • Double column machine provides maximum capacity and rigidity
  • Blade angle is at 4° from the horizontal which assists in the cutting of large sections and structural profiles
  • Hydraulic lift of the saw head
  • Hydraulic full stroke vise
  • Hydraulic tilt of saw head with digital display of angle
  • Design utilizes linear bearings for high stiffness and smooth motion
  • Electronic variable speed
  • Blade breakage and open door automatic shut off with alarm indicator
  • Saw up travel can be set to minimize distance between the blade and the top of the material
  • Saw down travel can be set to allow notching of blocks
  • Semi-automatic cut cycle
  • Manual saw control, saw up, rapid saw down, saw cut
  • Cutting feed rate hydraulically adjusted
  • Load sensing valve stops the feed if the blade starts to overload, typical cutting structural shapes
  • Magnetic motor starter with automatic shut off at the end of cut, motors thermal overload protection
  • Power disconnect on machine
  • Blade guards
  • Powered blade brush to remove cutting chips
  • Blade guides are carbide faced with rollers to remove blade twist and dampen vibration
  • Flood coolant system to both saw guides with adjustable flow rates
  • Direct blade drive using a planetary gear box for a high efficiency design
  • Electric system uses only C.S.A./UL approved components and is electrically approved
  • Premium quality bimetal bandsaw blade
  • Instruction and parts manual