Loading
Questions ?
Call us at 905-624-5536
Call us at 905-624-5536
| Search our site Loading
|
|
Questions ? Call us at 905-624-5536 |
||
 5" stroke slotter |
 8", 12" and 14" stroke slotters |
| Features: - hardened and ground slideways - automatic tool releif on upstroke on AT versions - centralized lube system |
 |
 |
TS-200-K Shown with optional work light. In this picture the rotary table is already bubble wrapped for shipping. |
TS-300-AT Shown with optional worklight, 3 jaw chuck and ram guard to CE standards |
 The head tilted to make a tapered keyway or slot. The auto tool back off device must be disabled and the part is machined by feeding the X axis. |
|
| The K series has a fixed tool position. Most applications will
benefit from the AT models that have automatic tool back off on the upstroke,
reducing wear on the cutter. On the AT series the automatic tool back off can be disabled. This permits cutting slots parallel to the X axis, which may be needed for some larger diameter jobs or cutting on the outside diameter. Most jobs are done feeding the Y axis towards the column with the tool back off enabled. The rotary table is standard equipment. It can be removed to put a workpiece directly on the table, giving more work height and flexibility of centering. The rotary table can be offset. It has an enlarged bore to contain swarf and allow tool passage clear through most jobs without needing to stage the work up on parallel bars. The rotary table comes with index plates that will give the most common numbers of divisions. For special applications a vernier dial reading to 0.001 degrees is an available option. The stroke on these machines is fixed length. The position of bottom of the stroke is adjustable, see ram adjustment in the table below. This is used to set the stroke so the tool just clears the bottom of the part or the stop point when doing blind holes. |
TS-125K |
TS-200-K |
TS-200-AT |
TS-300-K |
TS-300-AT |
TS-350-K |
TS-350-AT |
|
| Stroke | 125mm 5" |
50 - 200mm 2 to 8" |
50 - 300mm 12" |
50 - 350mm 14" |
|||
| Table travels | 300 x 400 mm 12" x 16" |
460 x 460 mm 18" x 18" |
|||||
| Ram adjustment | 200 mm 8" |
320mm 12 1/2" |
|||||
| No of speeds | 5, belt change |
4 optionally variable speeds |
|||||
| Speeds, strokes per min. | 35,54, 79,112, 160 |
28, 48, 73, 105 |
28, 48, 73, 105
|
23, 40, 61, 87 |
|||
| Speed range with optional variable speed drive | n/a |
5 to 96 SPM |
|||||
| Head tilt, left - right | ±30° |
±30° |
|||||
| Distance between end of ram ways and table / rotary table | 200 - 432mm 8" - 17" |
300 mm 11.8" |
365mm 14" |
470mm 18 1/2" |
|||
| Distance between cutter centerline and face of column | 280mm 11" |
355 mm 14" |
395 mm 15.5" |
510mm 22 " |
595 mm
23.5" |
560mm 22" |
595 mm 23.5" |
| Main drive motor | 3/4 Hp |
1 Hp |
3 Hp |
5 Hp |
|||
| Rotary table daimeter | optional |
400 mm 16" |
560mm 22" |
||||
| Net weight | 650 Kg 1,430 lbs |
900 Kg 1,980 lbs |
1550 Kg 3,410 lbs |
2000 Kg 4,400 lbs |
|||
 |
For slotting attachments for milling machines Click here |