Questions ?
Call us at 905-624-5536
HH Roberts Machinery logo Search our site
Loading
male H.H. Roberts Machinery Limited
1324 Matheson Blvd E., Mississauga, Ontario, Canada. L4W-2Z7, Fax 905-624-9065
credit card logos
Shanghai Z-5035-A    1 3/8" drill press
Shanghai Z-5035-A      Geared Head Drill with Power Feeds and Semi-automatic Tapping Cycle
  Drilling capacity 1  3/8" 35 mm
Tapping capacity .95" M24
Diameter of column 5.53" 140 mm
Spindle travel 7.9" 200 mm
Spindle axis to column 14.23" 360 mm
Spindle nose to table 23.6" 600 mm
Spindle nose to base 47.43" 1200 mm
Spindle taper MT4
Spindle speed range 78 ~ 3,120 RPM
 Number of spindle speeds 12
Spindle feeds 3
Feed rates 4, 8 and 12
thou / rev
0.1, 0.2 and 0.3
mm / rev
Worktable surface 16.9" x 15 " 430 × 380 mm
Adjustmentl of worktable 22.05" 560 mm
Base surface 17" x 17.3" 405 × 395 mm
Worktable and base T-slots 2-14mm and 2-18mm
Main motor - 2 speed 2 / 2.9 Hp 1.5 / 2.2 Kw
Coolant motor ( optional ) 1.6 US GPM 6 L/Min
Weight 1,210 Lb. 550 Kg.
Packing dimennsions 40" x 24" x 84.6" 100 × 61 × 215 cm

Shanghain Z5035A geared head drill with power feeds and tapping cycle
  • Geared headstock with hardened and ground steel gears
  • Four power feeds actuated by pushbuttons in each feed lever, engaged by electromagnetic clutch. with release built into the depth gauge.
  • Semi-automatic tapping cycle. Spindle runs forward to tap and reverses when the pushbutton in the feed lever is pushed, then reverses again at the top of the stroke, ready for the next hole.
  • Worktable can be rotated ±180°and tilted ±45°
  • Both motor-driven and manually operated lifting system of worktable.
  • Coolant system
  • Adjustable depth stop with inch and metric scales
  • Table has double acting linked clamps with safety interlock to power elevation
  • Drill speed chart for iron and steel on faceplate
  • Drill chuck guard with built in switch to CE standards
  • Available with 600/3/60 electrics, CSA approved, and 230/3/60
  • Standard equipment includes a MT4-3, MT4-2 and MT2-1 sleeves, drift, anchor bolts and manual.
  • Built in worklight
  • CE, CSA, UL approved main electrical components
  • Ideal choice for single piece, small batch and mass production for drilling, counter boring, reaming, tapping, spot facing etc.