Questions ?
Call us at 905-624-5536
HH Roberts Machinery logo Search our site
Loading
male H.H. Roberts Machinery Limited
1324 Matheson Blvd E., Mississauga, Ontario, Canada. L4W-2Z7, Fax 905-624-9065
credit card logos
Shanghai ZB-5035    1 5/16 " drill press
Shanghai ZB-5035 Geared Head Drill with Power Feeds and Semi-automatic Tapping Cycle
Single Speed Main Motor - all geared speeds
Drilling capacity 1 5/16 " 35 mm
Tapping capacity 1" M24
Diameter of column 5.53" 140 mm
Spindle travel 7.1" 180 mm
Distance spindle axis to column 13.04" 330 mm
Max.Distance spindle nose to table 23.6" 600 mm
Max.Distance spindle nose to base 46.65" 1180 mm
Spindle taper MT4
Spindle speed range 90 ~ 2,460 RPM
Number of spindle speeds 12
Spindle feeds 3
Feed rates 4, 8 and 12
thou / rev
0.1, 0.2, 0.3
mm / rev
Dimension of worktable surface 16" x 15 " 430 × 380 mm
Max. travel of worktable 20.47" 520 mm
Dimension of base 16" x 15.6" 405 × 395 mm
Worktable and base T-slots 2-14mm and 2-18mm
Spindle motor 2.7 Hp 2 Kw
Coolant motor 1.6 US GPM 6 L / min
Net Weight 1,166 Lb. 530 Kg.
Packing dimennsions 40" x 24" x 84.6 " 100 × 61 × 215 cm

Shanghai ZB5035 drill press

• Geared headstock with hardened and ground steel gears

• Four power feeds actuated by pushbuttons in each feed lever, engaged by electromagnetic clutch. with release built into the depth gauge.

• Semi-automatic tapping cycle. Spindle runs forward to tap and reverses when the pushbutton in the feed lever is pushed, then reverses again at the top
     of the stroke, ready for the next hole.

• Worktable can be rotated ±180°and tilted ±45°

• Both motor-driven and manually operated lifting system of worktable.

• Coolant system

• Adjustable depth stop with inch and metric scales

• Table has double acting linked clamps with safety interlock to power elevation

• Drill speed chart for iron and steel on faceplate

• Drill chuck guard with built in switch to CE standards

• Available with 600/3/60 electrics, CSA approved, and 230/3/60

• Standard equipment includes a MT4-3, MT4-2 and MT2-1 sleeves, drift, anchor bolts and manual.

• Built in worklight

• CE, CSA, UL approved main electrical components

• Digital display of spindle speed and drilling depth

• Ideal choice for single piece, small batch and mass production for drilling, counter boring, reaming, tapping, spot facing etc.