|
Sunmaster CL series:
17" Swing |
Made in Taiwan Roberts Machinery has been selling Sunmaster Lathes for over 15 years Download the catalogue |
|
FEATURES
|
The electronic variable speed drive on the V versions of this series can be fitted with the Anilam 450-L digital readout which when coupled to the spindle drive gives constant surface speed like on a CNC lathe, and the benefits from it of better surface finish, longer tool life and more efficient cutting times. The Anilam readout also holds tool offset lengths so cut positioning can be done to drawing dimensions even when tools are changed. |
CL-1730 |
CL-1740 |
CL-1760 |
CL-1730V |
CL-1740V |
CL-1760V |
|||||||||||||||||
Capacity |
Height of centers |
216mm (8.5") |
||||||||||||||||||||
Swing over bed |
435mm 17" | |||||||||||||||||||||
Swing in gap |
622mm (20.98") |
|||||||||||||||||||||
Swing over
cross slide |
277mm (10.9") |
|||||||||||||||||||||
Distance between
centers |
760mm 30" |
1000mm 40" |
1500mm 60" |
760mm 30" |
1000mm 40" |
1500mm 60" |
||||||||||||||||
Width of bed |
305m (12") |
|||||||||||||||||||||
Gap width in front
of faceplate |
120mm (4.72") |
|||||||||||||||||||||
Headstock & Main spindle |
Spindle nose,
Internal taper |
D1-6", MT. No.6 |
||||||||||||||||||||
Spindle center
sleeve |
MT. No.6 x MT. No.4 |
|||||||||||||||||||||
Spindle bore |
52.5mm (2.066") |
|||||||||||||||||||||
Spindle speed: /Range |
|
|
||||||||||||||||||||
Carriage |
Length on bed / Width of carriage |
440mm (17.32") / 477mm (18.77") |
||||||||||||||||||||
Cross slide travel |
270mm (10.62") |
|||||||||||||||||||||
Top slide travel |
120mm (4.72") |
|||||||||||||||||||||
Threads & Feeds |
Whitworth threads: Kinds/Range |
45 Kinds / 2 ~ 72 T.P.I. |
||||||||||||||||||||
Metric threads:
Kinds/Range |
39 Kinds / 0.2 ~ 14mm |
|||||||||||||||||||||
D.P. threads: Kinds / Range |
21 Kinds / 8 ~ 44 D.P. |
|||||||||||||||||||||
M.P. threads: Kinds / Range |
18 Kinds / 0.3 ~ 3.5 M.P. |
|||||||||||||||||||||
Longitudinal feeds |
0.04 ~ 1.0 mm (0.0015" ~0.04") |
|||||||||||||||||||||
Cross feeds |
0.02 ~ 0.5 mm (0.00075" ~0.02") |
|||||||||||||||||||||
Tailstock |
Quill diameter |
59mm (2.322") |
||||||||||||||||||||
Quill travel |
127mm (5") |
|||||||||||||||||||||
Taper of center |
MT. No.4 |
|||||||||||||||||||||
Motor |
Main spindle |
5 HP 4P OPT. 7.5HP 4P / 3.75 HP 8P |
AC 3.7kW (5HP), Inverter |
|||||||||||||||||||
Forced lubrication
for headstock |
------ |
1/4HP |
||||||||||||||||||||
Coolant pump |
1/8HP |
|||||||||||||||||||||
Weight |
1500 kgs 1800 gs |
1600 kgs 1900 kgs |
1850 kgs 2150 kgs |
1500 Kgs 1800Kgs |
1600 kgs 1900 kgs |
1850 kgs 2150 kgs |
||||||||||||||||
Specification subject to change without notice |
Options: the picture below shows and ERL model with several options: - 5C collet closer - rear splash guard with work light - chuck guard - sliding toolpost guard ( requires the rear splash guard) - leadscrew cover - live center |