 |
Questions ? Call us at 905-624-5536 |
||||
|
|||||
|
||||||||||
| Many of the links on this page are active at this time. We will be uploading the documents soon. |
| Trademarks | Models | Comments |
| Anilam Controls | 1100 Mill controls | |
| 1200 Lathe controls | ||
| 1400 Mills controls | ||
| 3200 and 3300 Mills controls | ||
| 4200 Lathe controls | ||
| 5300 Mill controls | ||
| 6300 Mill Controls | ||
| Topwell / HH Roberts Knee Mills | 3-VK and 4-VK CNC | |
| 5-VK CNC | ||
| 5-VK CNC | ||
| 5-BVK CNC | on line, sold as Yamazen, Hurco and Topwell | |
| 5-BVKS CNC | use 5-BVK manual above for all parts except the table and saddle for the table and saddle see the BED MILLS section below and use TW-32-Q. Ballscrew and servo motor mounts evolved significantly so contact us for correct configuration. |
|
| TW-xx-GL CNC with 3300 | on line | |
| TW-xx-GL CNC with 5300 | on line | |
| SEM Servo Motors | MT- series DC motors | brushes, caps and tachogenerators in stock. but they are getting hard to get. |
| Topwell / HH Roberts bed mills and machining centers | TW-96 and TW-32 ( large combined book ) | on line |
| TW-32 with GL Vector Drive Head | see above | |
| Quill type machines with Anilam 3300 CNC controls | on line | |
| Quill type machines with Anilam 5300 CNC controls | on line | |
| TW-105-RH | on line | |
| TW-105-TRH | on line | |
| TW-31 series | on line | |
| TW-40 series | on line | |
| BM-40 series | on line | |
| TW-50 series | on line | |
| TW-60 | ||
| MV series - all models | call | |
| MV series - electrical drawings | on line | |
| HH Roberts / Annyang Lathes | 16", 18", and 20" series | some customized machines will need additional instructions. |
| electrical drawings | ||
| Hatec Magazine Bar Feeder | Model AM-90 | some parts in stock 1 used AM-90 in stock |
| Cyclematic Lathes | CT-1118 Toolroom CNC lathe | not on lne, call us |
| CT-606 Gang tooling CNC lathe | not on line call us | |
| Dah Lih Machining Centres | we have one X axis ballscrew for Dah Lih 1020 machining center | not on line |
| Pragati Turrets | parts and instructions for CNC lathe Turrets | call |
| Yamazen CNC Knee Mill Model 5-BVK |
with Fanuc or Allen-Bradley controls | These machines were made by Topwell. We have many parts in stock The parts list are not on line yet. |
| THK Linear ways | we have a set of THK linear ways in stock | call us |
| Lio Shing lathe turrets | Lio Shing LS-120, LS160 and LS240 turret parts | we have some parts in stock, call for a parts list |
