Search our site
Loading
HH Roberts Machinery Ltd logo
Questions ?
Call us at 905-624-5536
H.H. Roberts Machinery Limited
1324 Matheson Blvd E., Mississauga, Ontario, Canada. L4W-2Z7, Fax 905-624-9065
asdf   asdf

HH Roberts / Annyang DY-380 and 410
15" and 16" Swing, 2" Spindle Bore
Available with 30", 40", and 60" Centers.

AnnnYang 16" CNC lathe with Anilam 4200 control
<


Fagor CNC logo


Fanuc CNC logo
Showing the 16" x 30" model in the lift up door configuration, with standard toolpost
Click Here to download our catalogue in PDF format. Adobe Acrobat Reader, latest version will be needed to open this file.


Download the Annnyang CNC lathe Catalog

AnnnYang 16" CNC lathe with Anilam 4200 control
This shows the machine closed for protection.  The advantages of this guard design are that the door lifts straight up and clears the center line, which allows unobstructed loading with an overhead hoist, very important on larger machines. Also, all the coolant drippings are captured back in the machine, not over the headstock or on the floor. We can add an automatic lift system that will open the door with a pushbutton, or an M-function in the program.   Click here for a picture with traditional sliding doors.
Pragati Electric Turret
The Pragati turret disc showing the 8 turning positions as well as 3 bolt on boring tool block and one facing tool block. Note the abundance of coolant ports.
AnnnYang 16" CNC lathe with Anilam 4200 control
The base castings for this series has provision for fitting a chip conveyor, as shown here. A higher exit point and larger capacity chip cart is also available.
AnnnYnag 16" CNC lathe with Anilam 4200 control This is a 16" x 30" model with a hydraulic chuck and hydraulic 8 position turret.
Base of ANNYANG 16" CNC lathe with Anilam 4200 control
The base on all of this series machines is a solid, one piece casting.
electric turret
To the left is the optional automatic 4 way indexing turret toolpost.  This toolpost has 2 coolant ports on the base below the turret.  The coolant ports are normally fitted with a copper tube to allow adjustment of the aim.  They coolant ports are fixed and do not change when the turret indexes.  This is a very economical automatic toolpost if you can live with only 4 tools and the coolant function.  This toolpost must be mounted on the rear of the cross slide. These turrets do not lift up during unclamp or rotation

 
DY-380
DY-410
swing over bed
380mm
15"
410mm
16"
swing over cross slide
170mm
6.7"
210mm
8"
distance between  centers
750 / 1000 / 1500mm
30" / 40" /  60"
max. cutting diameter  
300mm
12"
max. cutting length
500 / 750 / 1150mm
29.5" / 45"
spindle nose
D1-6"
spindle bore
54mm
2 1/8"
bar capacity
52mm
2"
spindle taper
MT 6
spindle speed
H 600-3000
M 200-1300
L 50-450
cross travel ( X  axis)
180mm   7"
Iongitudinal travel ( Z  axis)
500 / 750 / 1250mm
29.5" / 45"
rapid traverse X
5 M/min
200 ipm
rapid traverse Z
10 M/min
400 ipm
feed rate
0.001-500mm/rev      0.0004 - 20" / rev
spindle power
10 HP continuous / 12 .5 Hp intermittent
axis servo motors
2.1NM - 4.5NM
optional hydraulic pump
2HP /  1.5KW
bed width
305mm
12"
tailstock quill diameter
54mm   2"
tailstock quill travel
150   5"
tailstock quill taper
MT 4
net weight (approx.)
1650, 1950, 2150 Kgs
1800 / 2000 / 2200 Kgs