Search our site
Loading
HH Roberts Machinery Ltd logo
Questions ?
Call us at 905-624-5536
H.H. Roberts Machinery Limited
1324 Matheson Blvd E., Mississauga, Ontario, Canada. L4W-2Z7, Fax 905-624-9065
asdf   asdf


   

Annn Yang 630mm and 730mm C-Models

Swings of 25" and 29"

Up to 4,000mm / 157 " centers


showing the AnnnYang DY-630 x 3000 CNC lathe
Triple V bed design
AnnnYang DY-730x4000 CNC lathe

MODEL DY-630C DY-730C
Machining capability Distance between centers  nominal 1000 / 1500 / 2000 / 3000 / 4000mm
40" / 60" / 80" / 120" / 160"
Swing over bed 630mm
24.8"
730mm
28.74"
Swing over cross slide 410mm
16.14"
510mm
20.07"
Main spindle Speeds and bores
Spindle
Nose
Spindle
Bore
Spindle
speed
D1-8
A2-8
104mm
4.1"
L  50-300
H  300 - 2000
D1-11
A2-11
130mm
5.11"
L 50 - 300
H 300 - 1500
Spindle taper MT10 or MT15
Travel Cross travel (X axis) 360mm
14.17"
Longitudinal travel (Z axis) 700 / 1200 / 1700 / 2700 / 3700mm
27.56" / 47.24" / 66.93" / 106.3" / 145.67"
Feeds X axis rapid traverse 5M/min
200 IPM
Z axis rapid traverse 10M/min
400 IPM
Cutting feed rate 0.001-500mm/rev (0.0004”-20”/rev)
Motors Main motor 20hp
Inverter 20hp
X axis servo motor 
( may vary according to CNC system )
2.49kw  /  11.9Nm
Z axis servo motor
(may vary according to CNC system )
4.36kw / 20.8Nm
Oil pump 80W
Coolant pump 1/4hp
Hydraulic tank pump (optional) 3hp (2.2kw)
Tank capacity Hydraulic tank (optional) 20L
Lubrication pump 2L
Coolant tank  
Ball screw X axis diameter 32mm   1  1/4"
Z axis diameter 50mm    2"
Bed Width 435mm     17.125"
Tailstock Quill diamete 90mm    3.54"
Quill travel 203mm    8"
Quill taper MT5
   
Above specifications are subject to change without notice. Special requirement please connect with us.

Standard Equipment and Features
• automatic gear change system
• quick change 4 way toolpost
• coolant system
• centralized automatic lube system for slideways and ballscews
• steady rest
• worklight(s)
 
Options Include
• Hydraulic power chucks
• Choice of Anilam, Fagor or Fanuc CNC controls
• Headstock oil cooling system
• Electric or Hydraulic tool turrets, horizontal or vertical axis
     We can fit Duplomatic or Pragati turrets before or after delivery
• Hydraulic tailstock
• Air lift on tailstock
• Special carraiges and steadies for deep hole drilling
• Chip conveyor systems and chip carts
• Larger capacity steady rests


power turret option for CNC lathe Optional hydraulic tailstock for the CNC lathe
12 position tool turret for the Annnyang cnc lathes optional Servo motor for spindle positioning
tailstock with air lift system direct drive on Z axis
linear Scales Optional power hydraulic chuck
electric 4 way  turret