Search our site
Loading
HH Roberts Machinery Ltd logo
Questions ?
Call us at 905-624-5536
H.H. Roberts Machinery Limited
1324 Matheson Blvd E., Mississauga, Ontario, Canada. L4W-2Z7, Fax 905-624-9065
asdf   asdf


   

Annn Yang 660mm and 760mm Models

Swings of 26 " and 30"

Up to 10,000mm / 393" centers
Annn Yang DY1000C CNC lathe

Download the catalogue

    DY-660C DY-760C
Machining capability Distance between centers (mm) 1000 / 2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 / 9000 / 10000
39 " / 78" / 118" / 157" / 196" / 275" / 314" / 354" / 393"
Swing over bed 660mm
25.98"
760mm
29.92"
Swing over cross slide 390mm
15.35"
490mm
19.29"
Main spindle  
Spindle
Nose
Spindle
Bore
Spindle
speed
D1-11
130mm
5.11"
L 40 - 130
M  130 - 400
H 400 - 1200
A2-11
160mm
6.3"
L 20 - 110
M 110 - 320
H 320 - 660
  Spindle taper MT12
Travel Cross travel (X axis) 400mm
15.74"
Longitudinal travel (Z axis)
600 / 1600 / 2600 / 3600 / 4600 / 5600 / 6600 / 7600 / 8600 / 9600
24", 63", 102", 142", 220", 260", 300", 338", 278"
Feeds X axis rapid traverse 5M/min   200 IPM
Z axis rapid traverse 7.5M/min  300 IPM
Cutting feed rate 0.001-500mm/rev (0.0004”-20”/rev)
Motors Main motor 30hp(Std.) / 40hp(Opt.)
Inverter 30hp(Std.) / 40hp(Opt.)
X axis servo motor 2.49kw/11.9Nm / 2000rpm (may vary according to CNC system)
Z axis servo motor /8.31kw/39.7Nm / 2000rpm (may vary according to CNC system)
Oil pump 100W
Coolant pump 450W, 6~10bar
Hydraulic tank pump 3hp (2.2kw)(optional)
Tank capacity Hydraulic tank (optional) 20L
Lubrication pump 8L
Ball screw X axis diameter 40mm   1.57"
Z axis diameter 63mm    2.48"
Bed Width 482mm    19"
Tailstock Quill diameter 115mm   4.5"
Quill travel 300mm     12"
Quill taper MT6
     
Above specifications are subject to change without notice. Special requirement please connect with us.

Standard Equipment and Features
• automatic gear shift
• quick change 4 way toolpost
• coolant system
• centralized automatic lube system for slideways and ballscews
• steady rest
• worklight(s)
 
Options Include
• Hydraulic power chucks
• Choice of Anilam, Fagor or Fanuc CNC controls
• Headstock oil cooling system
• Electric or Hydraulic tool turrets, horizontal or vertical axis
• Hydraulic tailstock
• Air lift on tailstock
• Special carraiges and steadies for deep hole drilling
• Chip conveyor systems and chip carts
• Larger capacity steady rests
  QWRE QWRE  
QWRE QWRE QWRE QWRE
QWRE QRE QWR QRE
QWR QWRE QWRE QWRE
QWRE QWRE QWRE QWRE
QWRE QWRE QWRE QWRE
QWRE QWRE QWRE QWRE

power turret hydraulic tailstock
12 tool turret Servo motor for spindle positioning
tailstock with air lift system direct drive on Z axis
linear Scales hydraulic chuck
electric 4 way  turret