Questions ?
Call us at 905-624-5536
HH Roberts Machinery logo
male H.H. Roberts Machinery Limited
1324 Matheson Blvd E., Mississauga, Ontario, Canada. L4W-2Z7, Fax 905-624-9065
credit card logos
Mega logo
Mega automatic bandsaws lineup
Mega Automatic with scissors style head
For Twin Column Style click here
Available in Automatic or CNC versions:
This series is in the traditional tilt head or scissors style design with a sliding vise to advance the bar stock. Optional designs in the vise system allow for normal or reduced last piece sizes.

Quality design, skillful engineering and imaginative design give every MEGA Band Saw exceptional cutting capacity.
  • A completely automatic cutting cycle synchronized with an automatic barfeed mechanism and stock clamping action provide accurate repetitive cutting.
  • An excellent blade tensioning system and guides keep the blade aligned and under constant load at all times.
  • A hydraulically controlled cutting feed maintains a constant cutting rate regardless of the workpiece cross section.
  • A power-driven brush continually flushed by a cutting fluid spout keeps the blade and saw guides free of chips for smoother cutting.
  • A quick approach and normal feed rate selector are equipped to cause the blade to quickly descend into position.
  • A "Cutting Piece Counter" is used to preset the number of cuts required during automatic operation.
  • Two hydraulically operated vises,one a fixed front vise,the other an indexible travelling vise in the rear side.
  • The hydraulically operated nesting fixture is designed for high producton multiple sawing of stacked bars, small rounds and tubes. The fixture contains vertical cylinders mounted on the index and front vises. It holds stacked work firmly to prevent vibration.
  • A cutting length presetting device is built into the saw to preset the re-quired cutting lenght of a workpiece during automatic operation. It is simply operated by means of a read-out digital device.
  • Multiple stroke Preset Counter: when a cutting length of more than 16 is required, the number of strokes can be preset on this counter. The counter is capable of being set to a maximum of nine strokes 144 "
SAFE DESIGN - Every MEGA Band Saw is factory equipped with
  • Safety and thermal overload switches.
  • Well guarded blades and wheel covers.
  • Saw Blade shuts off automatically when cutting is complete.
  • Low voltage & zero voltage controls.
  • A blade breakage sensor/motion detector provides automatic shutoff.

Select below to go to a detailed page on each size.
BS-250 & 300
10" and 12" capacity
BS-400
16" capacity
BS-450
18" capacity